U-Boot 2018.03-at8 installer+ (Feb 17 2020 - 19:19:21 +0900) CPU: Freescale i.MX6ULL rev1.1 at 396 MHz Reset cause: POR I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 Net: FEC => boot 6818656 bytes read in 355 ms (18.3 MiB/s) 28077 bytes read in 58 ms (472.7 KiB/s) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-4.14-at20 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6818592 Bytes = 6.5 MiB Load Address: 82000000 Entry Point: 82000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 9eef9000, end 9ef02dac ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14-at20 (atmark@atde7) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 Thu Mar 19 19:40:13 JST 2020 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Atmark Techno Armadillo-640 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 490908K/524288K available (6144K kernel code, 262K rwdata, 1328K rodata, 3072K init, 242K bss, 16996K reserved, 16384K cma-reserved) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0900000 - 0xc0c00000 (3072 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0c419c0 ( 263 kB) [ 0.000000] .bss : 0xc0c46acc - 0xc0c83534 ( 243 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000056] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.001784] Console: colour dummy device 80x30 [ 0.002368] console [tty0] enabled [ 0.002436] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.002500] pid_max: default: 32768 minimum: 301 [ 0.002914] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.002967] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004159] CPU: Testing write buffer coherency: ok [ 0.005264] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.007285] devtmpfs: initialized [ 0.017067] random: get_random_u32 called from bucket_table_alloc+0x84/0x1bc with crng_init=0 [ 0.017571] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.017998] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.018069] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.019440] pinctrl core: initialized pinctrl subsystem [ 0.020766] NET: Registered protocol family 16 [ 0.022649] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.031344] vdd3p0: supplied by regulator-dummy [ 0.032150] cpu: supplied by regulator-dummy [ 0.032928] vddsoc: supplied by regulator-dummy [ 0.047300] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.047903] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl driver [ 0.077347] SCSI subsystem initialized [ 0.077702] usbcore: registered new interface driver usbfs [ 0.077806] usbcore: registered new interface driver hub [ 0.077949] usbcore: registered new device driver usb [ 0.079381] i2c-gpio i2c-gpio: using pins 117 (SDA) and 120 (SCL) [ 0.080403] Advanced Linux Sound Architecture Driver Initialized. [ 0.081665] Bluetooth: Core ver 2.22 [ 0.081765] NET: Registered protocol family 31 [ 0.081803] Bluetooth: HCI device and connection manager initialized [ 0.081852] Bluetooth: HCI socket layer initialized [ 0.081888] Bluetooth: L2CAP socket layer initialized [ 0.081929] Bluetooth: SCO socket layer initialized [ 0.082996] clocksource: Switched to clocksource mxc_timer1 [ 0.098665] NET: Registered protocol family 2 [ 0.099860] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.100010] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.100134] TCP: Hash tables configured (established 4096 bind 4096) [ 0.100324] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.100394] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.100735] NET: Registered protocol family 1 [ 0.101460] RPC: Registered named UNIX socket transport module. [ 0.101513] RPC: Registered udp transport module. [ 0.101543] RPC: Registered tcp transport module. [ 0.101572] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.413702] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.429587] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.431536] NFS: Registering the id_resolver key type [ 0.431634] Key type id_resolver registered [ 0.431669] Key type id_legacy registered [ 0.431772] fuse init (API version 7.26) [ 0.440421] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.440490] io scheduler noop registered [ 0.440522] io scheduler deadline registered [ 0.440971] io scheduler cfq registered (default) [ 0.446592] mxsfb 21c8000.lcdif: 21c8000.lcdif supply lcd not found, using dummy regulator [ 0.451694] mxsfb 21c8000.lcdif: failed to find mxc display driver [ 0.484820] Console: switching to colour frame buffer device 100x30 [ 0.507342] mxsfb 21c8000.lcdif: initialized [ 0.522696] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud = 5000000) is a IMX [ 0.529700] Console IMX rounded baud rate from 114943 to 114900 [ 0.541340] imx-sdma 20ec000.sdma: loaded firmware 3.3 [ 1.076823] console [ttymxc0] enabled [ 1.089046] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 52, base_baud = 5000000) is a IMX [ 1.106117] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 53, base_baud = 5000000) is a IMX [ 1.124193] libphy: Fixed MDIO Bus: probed [ 1.135646] tun: Universal TUN/TAP device driver, 1.6 [ 1.148302] CAN device driver interface [ 1.161138] fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator [ 1.178829] libphy: fec_enet_mii_bus: probed [ 1.226450] usbcore: registered new interface driver awl13 [ 1.239490] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 1.254664] usbcore: registered new interface driver pegasus [ 1.268228] usbcore: registered new interface driver rtl8150 [ 1.281680] usbcore: registered new interface driver r8152 [ 1.294673] usbcore: registered new interface driver lan78xx [ 1.307569] usbcore: registered new interface driver asix [ 1.320057] usbcore: registered new interface driver ax88179_178a [ 1.333243] usbcore: registered new interface driver cdc_ether [ 1.346098] usbcore: registered new interface driver net1080 [ 1.358497] usbcore: registered new interface driver cdc_subset [ 1.370873] usbcore: registered new interface driver zaurus [ 1.382662] usbcore: registered new interface driver cdc_ncm [ 1.394226] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.406707] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.418032] usbcore: registered new interface driver cdc_acm [ 1.429354] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 1.443339] usbcore: registered new interface driver usb-storage [ 1.455282] usbcore: registered new interface driver usbserial [ 1.466939] usbcore: registered new interface driver usbserial_generic [ 1.478977] usbserial: USB Serial support registered for generic [ 1.490538] usbcore: registered new interface driver cp210x [ 1.501657] usbserial: USB Serial support registered for cp210x [ 1.513058] usbcore: registered new interface driver ftdi_sio [ 1.524068] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.536796] usbcore: registered new interface driver mxuport [ 1.547759] usbserial: USB Serial support registered for MOXA UPort [ 1.559286] usbcore: registered new interface driver pl2303 [ 1.570285] usbserial: USB Serial support registered for pl2303 [ 1.587831] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.598610] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.633038] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.646064] hub 1-0:1.0: USB hub found [ 1.656165] hub 1-0:1.0: 1 port detected [ 1.671580] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.683064] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.723034] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.736757] hub 2-0:1.0: USB hub found [ 1.747290] hub 2-0:1.0: 1 port detected [ 1.759640] udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers [ 1.777314] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 1.790554] i2c /dev entries driver [ 1.801017] IR NEC protocol handler initialized [ 1.812284] IR RC5(x/sz) protocol handler initialized [ 1.824191] IR RC6 protocol handler initialized [ 1.835435] IR JVC protocol handler initialized [ 1.846457] IR Sony protocol handler initialized [ 1.857488] IR SANYO protocol handler initialized [ 1.868568] IR Sharp protocol handler initialized [ 1.879363] IR MCE Keyboard/mouse protocol handler initialized [ 1.891274] IR XMP protocol handler initialized [ 1.903775] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.916212] usbcore: registered new interface driver btusb [ 1.928104] sdhci: Secure Digital Host Controller Interface driver [ 1.940444] sdhci: Copyright(c) Pierre Ossman [ 1.950847] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.023034] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 2.103374] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 2.118857] usbcore: registered new interface driver usbhid [ 2.130855] usbhid: USB HID core driver [ 2.148418] random: fast init done [ 2.158303] mmc0: new DDR MMC card at address 0001 [ 2.174529] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.187675] NET: Registered protocol family 10 [ 2.203125] mmcblk0: mmc0:0001 Q2J55L 3.53 GiB [ 2.214138] mmcblk0boot0: mmc0:0001 Q2J55L partition 1 2.00 MiB [ 2.227701] Segment Routing with IPv6 [ 2.237448] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.250633] NET: Registered protocol family 17 [ 2.261212] can: controller area network core (rev 20170425 abi 9) [ 2.274138] NET: Registered protocol family 29 [ 2.284942] can: raw protocol (rev 20170425) [ 2.295515] can: broadcast manager protocol (rev 20170425 t) [ 2.307748] can: netlink gateway (rev 20170425) max_hops=1 [ 2.320321] mmcblk0boot1: mmc0:0001 Q2J55L partition 2 2.00 MiB [ 2.333493] mmcblk0gp0: mmc0:0001 Q2J55L partition 4 8.00 MiB [ 2.346357] mmcblk0gp1: mmc0:0001 Q2J55L partition 5 8.00 MiB [ 2.358970] mmcblk0gp2: mmc0:0001 Q2J55L partition 6 8.00 MiB [ 2.376486] mmcblk0gp3: mmc0:0001 Q2J55L partition 7 8.00 MiB [ 2.388648] mmcblk0rpmb: mmc0:0001 Q2J55L partition 3 4.00 MiB, chardev (248:0) [ 2.406406] Bluetooth: RFCOMM TTY layer initialized [ 2.417330] Bluetooth: RFCOMM socket layer initialized [ 2.428480] Bluetooth: RFCOMM ver 1.11 [ 2.437925] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.448963] Bluetooth: BNEP filters: protocol multicast [ 2.459924] Bluetooth: BNEP socket layer initialized [ 2.470551] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.482154] Bluetooth: HIDP socket layer initialized [ 2.492841] Key type dns_resolver registered [ 2.503595] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 900000000, volt: 1275000, enabled: 1. New: freq: 900000000, volt: 1275000, enabled: 1 [ 2.529860] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 792000000, volt: 1225000, enabled: 1. New: freq: 792000000, volt: 1225000, enabled: 1 [ 2.556843] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 528000000, volt: 1175000, enabled: 1. New: freq: 528000000, volt: 1175000, enabled: 1 [ 2.584533] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 396000000, volt: 1025000, enabled: 1. New: freq: 396000000, volt: 1025000, enabled: 1 [ 2.613178] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 198000000, volt: 950000, enabled: 1. New: freq: 198000000, volt: 950000, enabled: 1 [ 2.643452] ThumbEE CPU extension supported. [ 2.654033] mmcblk0: p1 p2 p3 [ 2.672372] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.685390] mmc1: host does not support reading read-only switch, assuming write-enable [ 2.708427] mmc1: new high speed SDHC card at address 59b4 [ 2.721367] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 2.744170] 5V: disabling [ 2.753478] ALSA device list: [ 2.763028] No soundcards found. [ 2.773206] mmcblk1: mmc1:59b4 USDU1 7.51 GiB [ 2.786113] Warning: unable to open an initial console. [ 2.803627] Freeing unused kernel memory: 3072K [ 2.817637] mmcblk1: p1 p2 [ 2.954419] systemd-udevd[77]: starting version 215 [ 2.975769] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.314629] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem [ 4.328508] EXT4-fs (mmcblk1p2): write access will be enabled during recovery [ 4.473793] EXT4-fs (mmcblk1p2): recovery complete [ 4.490416] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) Mounting proc: failed Remounting root rw: [ 4.960156] EXT4-fs (mmcblk1p2): re-mounted. Opts: data=ordered done Mounting sysfs: failed Mounting devtmpfs on /dev: failed Cleaning up system: done Running local start scripts. Creating mtd devnode: done Starting udevd: done Mounting devpts: done Changing file permissions: done Configure /home/ftp: done Starting syslogd: done Starting klogd: done Mounting tmpfs on /tmp, /var/tmp: done Mounting ramfs on /home/ftp/pub: done Configuring network interfaces: [ 7.513221] SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=2188000.ethernet-1:00, irq=POLL) [ 7.613191] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.20.2) started Sending discover... Sending discover... Sending discover... init eth0 No lease, failing failed Setting hostname: done Starting inetd: done Running local start script (/etc/config/rc.local). *+*+* Install Start!! *+*+* === Step.1 Formatting eMMC === The number of cylinders for this disk is set to 115712. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that the previous content won't be recoverable. The number of cylinders for this disk is set to 115712. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (1-115712, default 1): Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-115712, default 115712): Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (33-115712, default 33): Using default value 33 Last cylinder or +size or +sizeM or +sizeK (33-115712, default 115712): Command (m for help): Command action e extended p primary partition (1-4) Partition number (1-4): First cylinder (1011-115712, default 1011): Using default value 1011 Last cylinder or +size or +sizeM or +sizeK (1011-115712, default 115712): Command (m for help): Command action e extended p primary partition (1-4) Selected partition 2 First cylinder (4918-115712, default 4918): Using default value 4918 Last cylinder or +size or +sizeM or +sizeK (4918-115712, default 115712): Using default value 115712 Command (m for help): Partition number (1-4): Hex code (type L to list codes): Changed system type of partition 1 to b (Win95 FAT32) Command (m for help): Partition number (1-4): Hex code (type L to list codes): Command (m for help): Partition number (1-4): Hex code (type L to list codes): Changed system type of partition 3 to b (Win95 FAT32) Command (m for help): Partition number (1-4): Command (m for help): Disk /dev/mmcblk0: 3791 MB, 3791650816 bytes 4 heads, 16 sectors/track, 115712 cylinders Units = cylinders of 64 * 512 = 32768 bytes Device Boot Start End Blocks Id System /dev/mmcblk0p1 33 1010 31296 b Win95 FAT32 /dev/mmcblk0p2 4918 115712 3545440 83 Linux /dev/mmcblk0p3 1011 4917 125024 b Win95 FAT32 Partition table entries are not in disk order Command (m for help): [ 18.222470] mmcblk0: p1 p2 p3 The partition table has been altered. Calling ioctl() to re-read partition table mkfs.vfat 2.11 (12 Mar 2005) mke2fs 1.42.5 (29-Jul-2012) Discarding device blocks: [ 18.538173] random: crng init done done Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 221760 inodes, 886360 blocks 44318 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=910163968 28 block groups 32768 blocks per group, 32768 fragments per group 7920 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done mkfs.vfat 2.11 (12 Mar 2005) Disk /dev/mmcblk0: 3791 MB, 3791650816 bytes 4 heads, 16 sectors/track, 115712 cylinders Units = cylinders of 64 * 512 = 32768 bytes Device Boot Start End Blocks Id System /dev/mmcblk0p1 33 1010 31296 b Win95 FAT32 /dev/mmcblk0p2 4918 115712 3545440 83 Linux /dev/mmcblk0p3 1011 4917 125024 b Win95 FAT32 Partition table entries are not in disk order === Step.2 Setup Partition === /images/debian-stretch-armhf-a600-20200421[ 27.321588] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) .tar.gz: OK /images/uImage: OK [ 27.810744] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) /tmp//dev/mmcblk0p2//boot /images/a640.dtb: OK [ 28.252730] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) /tmp//dev/mmcblk0p2//boot === Step.3 Setup Bootloader === /images/u-boot.imx: OK 295+0 records in 295+0 records out 302080 bytes (295.0KB) copied, 0.040021 seconds, 7.2MB/s 512+0 records in 512+0 records out 524288 bytes (512.0KB) copied, 0.074698 seconds, 6.7MB/s 512+0 records in 512+0 records out 524288 bytes (512.0KB) copied, 0.098857 seconds, 5.1MB/s === Step.4 sync === Write Protect Groups 0-0 (Blocks 0-16383), Temporary Write Protection *+*+* Install Completed!! *+*+* U-Boot 2018.03-at8 (Feb 17 2020 - 19:19:11 +0900) CPU: Freescale i.MX6ULL rev1.1 at 396 MHz Reset cause: POR I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment Failed (-5) In: serial Out: serial Err: serial PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 Net: FEC Hit any key to stop autoboot: 0 ** File not found /boot/uImage ** ** File not found /boot/a640.dtb ** Wrong Image Format for bootm command ERROR: can't get kernel image! =>