root@armadillo:~# usb 1-1: new high-speed USB device number 2 using ci_hdrc usb-storage 1-1:1.0: USB Mass Storage device detected scsi host0: usb-storage 1-1:1.0 scsi 0:0:0:0: Direct-Access JetFlash Transcend 4GB 8.07 PQ: 0 ANSI: 4 sd 0:0:0:0: [sda] 7639040 512-byte logical blocks: (3.91 GB/3.64 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk relay program updating ... Stop relay.service AutoDeplay relay.tar.gz Started relay.service relay program updated successfully. gw program updating ... Stop gw.service AutoDeplay gw.tar.gz gateway apps startup... gateway apps started successfully. Started gw.service gw program updated successfully. umount /mnt . root@armadillo:~# usb 1-1: USB disconnect, device number 2 Unable to handle kernel NULL pointer dereference at virtual address 00000204 pgd = 80004000 [00000204] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.9.133-at21 #2 Hardware name: Freescale i.MX7 Dual (Device Tree) task: 88073f40 task.stack: 8809c000 PC is at expire_timers+0x3c/0x94 LR is at run_timer_softirq+0x9c/0x188 pc : [<8018a138>] lr : [<8018a22c>] psr: 20030193 sp : 8809de68 ip : 8baac418 fp : 40000001 r10: 81602080 r9 : 81017644 r8 : 81604fc4 r7 : 00000000 r6 : 00000200 r5 : 8809de88 r4 : 8baac3c0 r3 : 88aa21f0 r2 : 00000200 r1 : 8809de88 r0 : 8baac3c0 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 89eb806a DAC: 00000051 Process swapper/1 (pid: 0, stack limit = 0x8809c218) Stack: (0x8809de68 to 0x8809e000) de60: 8809de88 81602d00 8baac3c0 8809de88 81604fc4 81017644 de80: 81602080 8018a22c 00000200 8baad578 8baad4d4 8019b2c4 00000000 00000003 dea0: 7fffffff 8baad4c0 000000a0 81602084 00000001 ffffe000 00000101 80135d80 dec0: d37cd000 00000061 8baad700 81602080 8151c300 816a63c0 0000000a 00002ef1 dee0: 81602d00 00200040 00000000 816a63c0 8151fce4 00000001 8809df58 00000000 df00: 00000001 d607ff20 d57084ce 80136188 8151fce4 8010e59c 816051b8 81628000 df20: a080200c a0802000 8809df58 a0803000 d607ff20 80101504 807d48ec 20030013 df40: ffffffff 8809df8c 8baaeeb0 8809c000 d607ff20 8010bd8c 00000000 00000002 df60: 00000001 8809c000 8baaeeb0 81613284 00000061 00000061 8baaeeb0 00000001 df80: d607ff20 d57084ce 00000000 8809dfa8 80bb6dc4 807d48ec 20030013 ffffffff dfa0: 00000051 00000000 00000000 00000000 8151e390 8baaeeb0 81613284 ffffe000 dfc0: 816a34f6 81604d88 81520ea8 81604d80 80fb3c9c 8016fed4 00000000 81604d2c dfe0: 00000002 80fce6b4 8808006a 816a5320 00000000 801015ac 00000000 00000000 [<8018a138>] (expire_timers) from [<8018a22c>] (run_timer_softirq+0x9c/0x188) [<8018a22c>] (run_timer_softirq) from [<80135d80>] (__do_softirq+0x10c/0x248) [<80135d80>] (__do_softirq) from [<80136188>] (irq_exit+0xc8/0x10c) [<80136188>] (irq_exit) from [<8010e59c>] (handle_IPI+0x104/0x1ac) [<8010e59c>] (handle_IPI) from [<80101504>] (gic_handle_irq+0x88/0x8c) [<80101504>] (gic_handle_irq) from [<8010bd8c>] (__irq_svc+0x6c/0xa8) Exception stack(0x8809df58 to 0x8809dfa0) df40: 00000000 00000002 df60: 00000001 8809c000 8baaeeb0 81613284 00000061 00000061 8baaeeb0 00000001 df80: d607ff20 d57084ce 00000000 8809dfa8 80bb6dc4 807d48ec 20030013 ffffffff [<8010bd8c>] (__irq_svc) from [<807d48ec>] (cpuidle_enter_state+0x88/0x304) [<807d48ec>] (cpuidle_enter_state) from [<8016fed4>] (cpu_startup_entry+0x194/0x224) [<8016fed4>] (cpu_startup_entry) from [<801015ac>] (__enable_mmu+0x0/0x14) Code: e5932000 e5931004 e3520000 e5812000 (15821004) ---[ end trace 6212d0e13ea5ff12 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU0: stopping CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 4.9.133-at21 #2 Hardware name: Freescale i.MX7 Dual (Device Tree) [<8010f7fc>] (unwind_backtrace) from [<8010b470>] (show_stack+0x10/0x14) [<8010b470>] (show_stack) from [<803fffb8>] (dump_stack+0x78/0x8c) [<803fffb8>] (dump_stack) from [<8010e618>] (handle_IPI+0x180/0x1ac) [<8010e618>] (handle_IPI) from [<80101504>] (gic_handle_irq+0x88/0x8c) [<80101504>] (gic_handle_irq) from [<8010bd8c>] (__irq_svc+0x6c/0xa8) Exception stack(0x81601f20 to 0x81601f68) 1f20: 00000000 8baa4980 00000001 81600000 8baa0eb0 81613284 00000061 00000061 1f40: 8baa0eb0 00000001 e5b4c42b e5858571 00000000 81601f70 80bb6dc4 807d48ec 1f60: 20010013 ffffffff [<8010bd8c>] (__irq_svc) from [<807d48ec>] (cpuidle_enter_state+0x88/0x304) [<807d48ec>] (cpuidle_enter_state) from [<8016fed4>] (cpu_startup_entry+0x194/0x224) [<8016fed4>] (cpu_startup_entry) from [<81200c64>] (start_kernel+0x390/0x39c) ---[ end Kernel panic - not syncing: Fatal exception in interrupt U-Boot SPL 2016.07-at22 (Oct 15 2021 - 18:00:12) Trying to boot from SPI U-Boot 2016.07-at22 (Oct 15 2021 - 18:00:12 +0900) CPU: Freescale i.MX7D rev1.3 at 996MHz CPU: Extended Commercial temperature grade (-20C to 105C) at 43C Reset cause: POR Watchdog enabled I2C: ready DRAM: 512 MiB Boot Source: QSPI Flash Board Type: Armadillo-IoT G3L(0a200000) Revision: 0002 S/N: 39138 DRAM: 00001d05 XTAL: 00 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from SPI Flash... SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB *** Warning - bad CRC, using default environment Failed (-5) Loading Environment from SPI Flash... SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB *** Warning - bad CRC, using default environment Failed (-5) In: serial Out: serial Err: serial Found PFUZE300! deviceid 0x30, revid 0x11 Net: FEC0 switch to partitions #0, OK mmc1(part 0) is current device switch to partitions #0, OK mmc1(part 0) is current device reading boot.scr ** Unable to read file boot.scr ** reading boot.scr ** Unable to read file boot.scr ** reading uImage 12138840 bytes read in 293 ms (39.5 MiB/s) Booting from mmc ... reading armadillo_iotg_g3l.dtb 51971 bytes read in 18 ms (2.8 MiB/s) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-4.9.133-at21 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 12138776 Bytes = 11.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 84800000 Booting using the fdt blob at 0x84800000 Loading Kernel Image ... OK Using Device Tree in place at 84800000, end 8480fb02 Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.9.133-at21 (atmark@atde8) (gcc version 8.3.0 (Debian 8.3.0-2) ) #2 SMP PREEMPT Tue Jul 27 08:24:15 JST 2021 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt:Machine model: Atmark-Techno Armadillo-X1L Board Reserved memory: created CMA memory pool at 0x8c000000, size 320 MiB OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Memory policy: Data cache writealloc percpu: Embedded 14 pages/cpu @8ba9c000 s26636 r8192 d22516 u57344 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129920 Kernel command line: console=ttymxc4,115200 root=/dev/mmcblk2p2 rootwait rw PID hash table entries: 2048 (order: 1, 8192 bytes) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 167976K/524288K available (11264K kernel code, 654K rwdata, 5028K rodata, 4096K init, 493K bss, 28632K reserved, 327680K cma-reserved, 0K highme m) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xa0800000 - 0xff800000 (1520 MB) lowmem : 0x80000000 - 0xa0000000 ( 512 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x80c00000 (12256 kB) .init : 0x81200000 - 0x81600000 (4096 kB) .data : 0x81600000 - 0x816a3820 ( 655 kB) .bss : 0x816a5000 - 0x817204ec ( 494 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 arm_arch_timer: Architected cp15 timer(s) running at 8.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns Switching to timer-based delay loop, resolution 125ns Ignoring duplicate/late registration of read_current_timer delay clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=80000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: update cpu_capacity 1024 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80100000 - 0x80100058 CPU1: update cpu_capacity 1024 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (32.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu DDR type is DDR3! hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver imx7d-pinctrl 30330000.iomuxc: initialized IMX pinctrl driver MU is ready for cross core communication! GPIO line 13 (MCU_INTB) hogged as input GPIO line 43 (SVEN) hogged as output/high GPIO line 68 (RX_GATE) hogged as output/low mxs-dma 33000000.dma-apbh: initialized vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb 30800000.aips-bus:usbphynop1 supply vcc not found, using dummy regulator 30800000.aips-bus:usbphynop2 supply vcc not found, using dummy regulator gpio_bmic 3-0014: version: 2.0 bmic_regulator 3-0016: version: 1.0 i2c i2c-3: IMX I2C adapter registered i2c i2c-3: can't use DMA, using PIO instead. Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered MIPI CSI2 driver module loaded imx rpmsg driver is registered. Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.22 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized random: fast init done armadillo_x1l_extboard extboard: Atmark Techno ExtBoard01 without WL1837MOD board detected (Rev 4, SerialNumber=33437). clocksource: Switched to clocksource arch_sys_counter VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NET: Registered protocol family 2 TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 3, 32768 bytes) TCP: Hash tables configured (established 4096 bind 4096) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Bus freq driver module loaded workingset: timestamp_bits=14 max_order=17 bucket_order=3 squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc. fuse init (API version 7.26) NET: Registered protocol family 38 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) imx-sdma 30bd0000.sdma: loaded firmware 4.2 pfuze100-regulator 3-0009: Full layer: 1, Metal layer: 1 pfuze100-regulator 3-0009: FAB: 0, FIN: 0 pfuze100-regulator 3-0009: pfuze3000 found. 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 43, base_baud = 5000000) is a IMX 30a70000.serial: ttymxc4 at MMIO 0x30a70000 (irq = 45, base_baud = 5000000) is a IMX console [ttymxc4] enabled 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 283, base_baud = 500000) is a IMX 30a90000.serial: ttymxc6 at MMIO 0x30a90000 (irq = 285, base_baud = 500000) is a IMX imx sema4 driver is registered. [drm] Initialized [drm] Initialized vivante 1.0.0 20120216 on minor 0 brd: module loaded loop: module loaded (hci_tty): inside hci_tty_init (hci_tty): allocated 246, 0 fsl-quadspi 30bb0000.qspi: n25q128a13 (16384 Kbytes) 3 ofpart partitions found on MTD device 30bb0000.qspi Creating 3 MTD partitions on "30bb0000.qspi": 0x000000000000-0x000000100000 : "bootloader" 0x000000100000-0x000000140000 : "license" 0x000000140000-0x000000800000 : "reserved" libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky CAN device driver interface 30bf0000.ethernet supply phy not found, using dummy regulator pps pps0: new PPS source ptp0 libphy: fec_enet_mii_bus: probed fec 30bf0000.ethernet eth0: registered PHC device 0 PPP generic driver version 2.4.2 usbcore: registered new interface driver kaweth pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver rtl8150 usbcore: registered new interface driver r8152 usbcore: registered new interface driver asix usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver cdc_eem usbcore: registered new interface driver smsc95xx usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver sierra_net usbcore: registered new interface driver cdc_ncm usbcore: registered new interface driver qmi_wwan ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver cdc_wdm usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver sierra usbserial: USB Serial support registered for Sierra USB modem usbcore: registered new interface driver usb_serial_simple usbserial: USB Serial support registered for carelink usbserial: USB Serial support registered for zio usbserial: USB Serial support registered for funsoft usbserial: USB Serial support registered for flashloader usbserial: USB Serial support registered for google usbserial: USB Serial support registered for libtransistor usbserial: USB Serial support registered for vivopay usbserial: USB Serial support registered for moto_modem usbserial: USB Serial support registered for motorola_tetra usbserial: USB Serial support registered for novatel_gps usbserial: USB Serial support registered for hp4x usbserial: USB Serial support registered for suunto usbserial: USB Serial support registered for siemens_mpi usbcore: registered new interface driver usb_ehset_test 30b10200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b30200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b20200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b20000.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.1: EHCI Host Controller ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected using random self ethernet address using random host ethernet address usb0: HOST MAC ea:a2:e6:50:84:a6 usb0: MAC f2:c7:b4:63:f8:89 g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008 g_cdc gadget: g_cdc ready mousedev: PS/2 mouse device common for all mice input: 30370000.snvs:snvs-powerkey as /devices/soc0/soc/30000000.aips-bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0 bmic_rtc 3-0011: version: 1.1 bmic_rtc 3-0011: rtc core: registered bmic_rtc as rtc1 snvs_rtc 30370000.snvs:snvs-rtc-lp: rtc core: registered 30370000.snvs:snvs- as rtc0 i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x/sz) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR SANYO protocol handler initialized IR Sharp protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR XMP protocol handler initialized usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) bmic_thermal 3-0013: version: 1.0 imx2-wdt 30280000.wdog: timeout 10 sec (nowayout=0) Bluetooth: HCI UART driver ver 2.3 Bluetooth: HCI UART protocol H4 registered Bluetooth: HCI UART protocol BCSP registered Bluetooth: HCI UART protocol LL registered Bluetooth: HCI UART protocol ATH3K registered usbcore: registered new interface driver bcm203x usbcore: registered new interface driver btusb usbcore: registered new interface driver ath3k sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-esdhc-imx 30b40000.usdhc: Got CD GPIO sdhci-esdhc-imx 30b40000.usdhc: Got WP GPIO mmc0: SDHCI controller on 30b40000.usdhc [30b40000.usdhc] using ADMA sdhci-esdhc-imx 30b60000.usdhc: could not get ultra high speed state, work on normal mode sdhci-esdhc-imx 30b60000.usdhc: allocated mmc-pwrseq usb 2-1: new high-speed USB device number 2 using ci_hdrc mmc2: SDHCI controller on 30b60000.usdhc [30b60000.usdhc] using ADMA caam 30900000.caam: ERA source: CCBVID. caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: Instantiated RNG4 SH0 caam 30900000.caam: Instantiated RNG4 SH1 caam 30900000.caam: device ID = 0x0a16030000000000 (Era 8) caam 30900000.caam: job rings = 3, qi = 0 mmc2: new DDR MMC card at address 0001 mmcblk2: mmc2:0001 MMC8GB 3.65 GiB caam algorithms registered in /proc/crypto caam_jr 30901000.jr0: registering rng-caam caam 30900000.caam: caam pkc algorithms registered in /proc/crypto mmcblk2boot0: mmc2:0001 MMC8GB partition 1 4.00 MiB snvs-secvio 30370000.caam-snvs: can't get snvs clock snvs-secvio 30370000.caam-snvs: violation handlers armed - non-secure state usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver r8712u bmic_adc 3-0012: version: 1.0 coresight-etm3x 3007c000.etm: ETM 3.5 initialized coresight-etm3x 3007d000.etm: ETM 3.5 initialized mmcblk2boot1: mmc2:0001 MMC8GB partition 2 4.00 MiB usbcore: registered new interface driver snd-usb-audio NET: Registered protocol family 26 Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. nf_conntrack version 0.5.0 (8192 buckets, 32768 max) ctnetlink v0.93: registering with nfnetlink. nf_tables: (c) 2007-2009 Patrick McHardy nf_tables_compat: (c) 2012 Pablo Neira Ayuso xt_time: kernel timezone is -0000 IPVS: Registered protocols () IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: Creating netns size=912 id=0 IPVS: ipvs loaded. ipip: IPv4 and MPLS over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully arp_tables: arp_tables: (C) 2002 David S. Miller Initializing XFRM netlink socket NET: Registered protocol family 10 mip6: Mobile IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver ip6_gre: GRE over IPv6 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20161123 t) can: netlink gateway (rev 20130117) max_hops=1 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered ThumbEE CPU extension supported. imx_thermal 30000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C dhd_module_init in input: gpio-keys as /devices/soc0/gpio-keys/input/input1 input: gpio-wakeup as /devices/platform/gpio-wakeup/input/input2 snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 2022-06-30 02:17:24 UTC (1656555444) bmic_poweroff 3-0018: version: 1.0 cdc_ether 2-1:1.0 usb1: register 'cdc_ether' at usb-ci_hdrc.1-1, CDC Ethernet Device, 02:80:70:47:79:30 cdc_acm 2-1:1.2: ttyACM0: USB ACM device bmic_poweroff 3-0018: overrided pm_power_off function VDD_SD1: disabling VLDO2: disabling ALSA device list: No soundcards found. Warning: unable to open an initial console. Freeing unused kernel memory: 4096K systemd-udevd[204]: starting version 215 random: systemd-udevd: uninitialized urandom read (16 bytes read) mmcblk2rpmb: mmc2:0001 MMC8GB partition 3 4.00 MiB mmcblk2: p1 p2 p3 EXT4-fs (mmcblk2p2): recovery complete EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null) cgroup: cgroup2: unknown option "nsdelegate" systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 10 (buster)! systemd[1]: Set hostname to . systemd[1]: /lib/systemd/system/thermal_trip_point-set.service:1: Assignment outside of section. Ignoring. systemd[1]: /lib/systemd/system/thermal_trip_point-set.service:2: Assignment outside of section. Ignoring. systemd[1]: Configuration file /etc/systemd/system/relay.service is marked executable. Please remove executable permission bits. Proceeding anyway. systemd[1]: /etc/systemd/system/relay.service:7: Failed to parse service restart specifier, ignoring: on systemd[1]: Configuration file /etc/systemd/system/gw.service is marked executable. Please remove executable permission bits. Proceeding anyway. systemd[1]: /etc/systemd/system/gw.service:7: Failed to parse service restart specifier, ignoring: on random: systemd: uninitialized urandom read (16 bytes read) random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. random: systemd: uninitialized urandom read (16 bytes read) [ OK ] Listening on Journal Socket. [ OK ] Set up automount Arbitrary…s File System Automount Point. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Listening on udev Kernel Socket. Starting Load Kernel Modules... Mounting POSIX Message Queue File System... [ OK ] Listening on Syslog Socket. Starting Journal Service... Mounting Kernel Debug File System... [ OK ] Reached target Remote File Systems. [ OK ] Reached target Swap. Starting Remount Root and Kernel File Systems... [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Started Journal Service. [ OK ] Started Load Kernel Modules. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Remount Root and Kernel File Systems. Starting Create System Users... Starting Load/Save Random Seed... Starting Apply Kernel Variables... Mounting Kernel Configuration File System... Mounting FUSE Control File System... Starting Flush Journal to Persistent Storage... [ OK ] Started Create System Users. [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started udev Coldplug all Devices. [ OK ] Mounted FUSE Control File System. systemd-journald[276]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Starting Update UTMP about System Boot/Shutdown... Starting Network Time Synchronization... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Login Service... Starting LSB: Load kernel …d to enable cpufreq scaling... Starting Modem Manager... [ OK ] Started Power off ELS31 safely. Starting System Logging Service... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Regular background program processing daemon. Starting Restore /etc/reso… the ppp link was shut down... Starting thermal_trip_point-set.service... Starting User Mode Init manager daemons... Starting Network Manager... Starting WPA supplicant... Starting Avahi mDNS/DNS-SD Stack... [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Started Daily man-db regeneration. [ OK ] Started Daily rotation of log files. [ OK ] Reached target Timers. [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resol…re the ppp link was shut down. [ OK ] Started thermal_trip_point-set.service. Starting Authorization Manager... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Started Login Service. [ OK ] Started Authorization Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... [ OK ] Reached target Network. Starting Permit User Sessions... Starting Connection Recover... Starting Hostname Service... IPVS: Creating netns size=912 id=1 [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started Modem Manager. [ OK ] Started Permit User Sessions. [ OK ] Started Connection Recover. [ OK ] Started LSB: set CPUFreq kernel parameters. [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready SMSC LAN8710/LAN8720 30bf0000.ethernet-1:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=30bf0000.ethernet-1:00, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready fec 30bf0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started User Mode Init manager daemons. [ OK ] Found device /dev/ttymxc4. [ OK ] Found device /dev/license. [ OK ] Started Network Manager Wait Online. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. [ OK ] Reached target Network is Online. Starting lh-iot gateway app daemon... Starting lh-iot relay app daemon... Starting LSB: exim Mail Transport Agent... Starting /etc/rc.local Compatibility... Starting Lighttpd Daemon... Mounting /opt/license... [ OK ] Started /etc/rc.local Compatibility. [ OK ] Mounted /opt/license. Starting change status LED... Starting input event poweroff daemon... [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttymxc4. [ OK ] Reached target Login Prompts. [ OK ] Started reset usb3503. [ OK ] Started change status LED. [ OK ] Started input event poweroff daemon. [ OK ] Started Lighttpd Daemon. [ OK ] Started LSB: exim Mail Transport Agent. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. gateway apps startup... gateway apps started successfully. [ OK ] Started lh-iot gateway app daemon. [ OK ] Started lh-iot relay app daemon. Debian GNU/Linux 10 armadillo ttymxc4 armadillo login: cdc_ether 2-1:1.0 usb1: kevent 12 may have been dropped random: crng init done random: 6 urandom warning(s) missed due to ratelimiting cdc_ether 2-1:1.0 usb1: kevent 12 may have been dropped cdc_ether 2-1:1.0 usb1: kevent 12 may have been dropped armadillo login: usb 1-1: new high-speed USB device number 2 using ci_hdrc usb-storage 1-1:1.0: USB Mass Storage device detected scsi host0: usb-storage 1-1:1.0 scsi 0:0:0:0: Direct-Access ADATA USB Flash Drive 0.00 PQ: 0 ANSI: 4 sd 0:0:0:0: [sda] 15378432 512-byte logical blocks: (7.87 GB/7.33 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk relay program updating ... relay.tar.gz not found. gw program updating ... gw.tar.gz not found. umount /mnt . armadillo login: usb 1-1: USB disconnect, device number 2 armadillo login: root Password: