Debian GNU/Linux 10 armadillo ttymxc4 armadillo login: sysrq: SysRq : Trigger a crash Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 961cc000 [00000000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 3216 Comm: bash Not tainted 4.9.133-at25 #2 Hardware name: Freescale i.MX7 Dual (Device Tree) task: 966f85c0 task.stack: a8268000 PC is at sysrq_handle_crash+0x24/0x2c LR is at sysrq_handle_crash+0x20/0x2c pc : [<804d2948>] lr : [<804d2944>] psr: 60000013 sp : a8269eb0 ip : 00000000 fp : 00000000 r10: 00000000 r9 : 00000002 r8 : 8163cf4c r7 : 00000000 r6 : 00000007 r5 : 00000063 r4 : 00000001 r3 : 00000000 r2 : 00000000 r1 : 00000001 r0 : 00000063 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 961cc06a DAC: 00000051 Process bash (pid: 3216, stack limit = 0xa8268218) Stack: (0xa8269eb0 to 0xa826a000) 9ea0: 816198f4 804d2dd8 00000002 00000000 9ec0: 00000000 a895d480 00000000 00000002 00000000 804d3348 804d32f4 8028523c 9ee0: a863a0c0 802851e0 01e85ec0 a8269f80 00000000 802293dc 00000000 00000000 9f00: 00000000 00000000 00000400 00000000 00000000 00000000 636ded48 042c1d80 9f20: 636df0fb 2eb38136 636df0fb 2eb38136 00000000 a800ad98 a800ad98 a8269f80 9f40: a863a0c0 00000002 01e85ec0 a8269f80 00000000 8022a21c 00000004 80bb8080 9f60: 00000001 a863a0c0 a863a0c0 00000000 00000000 01e85ec0 00000002 8022afb0 9f80: 00000000 00000000 636df0fb 00000074 01e85ec0 76e8adb0 00000004 80107a84 9fa0: a8268000 801078c0 00000074 01e85ec0 00000001 01e85ec0 00000002 00000000 9fc0: 00000074 01e85ec0 76e8adb0 00000004 00000002 00000002 00000000 00000000 9fe0: 00000004 7ee1c300 76e22443 76dab786 60000030 00000001 00000000 00000000 [<804d2948>] (sysrq_handle_crash) from [<804d2dd8>] (__handle_sysrq+0x80/0x164) [<804d2dd8>] (__handle_sysrq) from [<804d3348>] (write_sysrq_trigger+0x54/0x64) [<804d3348>] (write_sysrq_trigger) from [<8028523c>] (proc_reg_write+0x5c/0x84) [<8028523c>] (proc_reg_write) from [<802293dc>] (__vfs_write+0x1c/0x118) [<802293dc>] (__vfs_write) from [<8022a21c>] (vfs_write+0xa4/0x168) [<8022a21c>] (vfs_write) from [<8022afb0>] (SyS_write+0x3c/0x90) [<8022afb0>] (SyS_write) from [<801078c0>] (ret_fast_syscall+0x0/0x48) Code: e5834000 f57ff04e ebf10ce8 e3a03000 (e5c34000) CPU 1 will stop doing anything useful since another CPU has crashed Loading crashdump kernel... Bye! Booting Linux on physical CPU 0x0 Linux version 4.9.133-at25 (atmark@atde8) (gcc version 8.3.0 (Debian 8.3.0-2) ) #2 SMP PREEMPT Thu Nov 10 16:13:41 JST 2022 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt:Machine model: Atmark-Techno Armadillo-IoT Gateway G3 M1 Board OF: fdt:Ignoring memory range 0x80000000 - 0x90000000 OF: reserved mem: failed to allocate memory for node 'linux,cma' cma: Reserved 64 MiB at 0x96000000 Memory policy: Data cache writealloc ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/arm/kernel/devtree.c:158 arm_dt_init_cpu_maps+0x194/0x24c DT /cpu 2 nodes greater than max cores 1, capping them Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.133-at25 #2 Hardware name: Freescale i.MX7 Dual (Device Tree) [<8010fcfc>] (unwind_backtrace) from [<8010b470>] (show_stack+0x10/0x14) [<8010b470>] (show_stack) from [<80402bf8>] (dump_stack+0x78/0x8c) [<80402bf8>] (dump_stack) from [<801d95ac>] (__warn+0xe4/0x100) [<801d95ac>] (__warn) from [<80131628>] (warn_slowpath_fmt+0x38/0x48) [<80131628>] (warn_slowpath_fmt) from [<81205610>] (arm_dt_init_cpu_maps+0x194/0x24c) [<81205610>] (arm_dt_init_cpu_maps) from [<8120433c>] (setup_arch+0x890/0xc28) [<8120433c>] (setup_arch) from [<8120093c>] (start_kernel+0x68/0x39c) [<8120093c>] (start_kernel) from [<9000807c>] (0x9000807c) ---[ end trace 0000000000000000 ]--- crashkernel reservation failed - No suitable area found. percpu: Embedded 14 pages/cpu @8bcf8000 s26636 r8192 d22516 u57344 Built 1 zonelists in Zone order, mobility grouping off. Total pages: 48466 Kernel command line: console=ttymxc4,115200 root=/dev/mmcblk2p2 rootwait rw nr_cpus=1 systemd.unit=kdump-tools.service irqpoll nousb ata_piix.prefer_ms_hyperv=0 crashkernel=192M elfcorehdr=0xa3f00000 mem=195584K Misrouted IRQ fixup and polling support enabled This may significantly impact system performance PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 105036K/195584K available (11264K kernel code, 654K rwdata, 5028K rodata, 4096K init, 501K bss, 25012K reserved, 65536K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0x8c000000 - 0xff800000 (1848 MB) lowmem : 0x80000000 - 0x8bf00000 ( 191 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x80c00000 (12256 kB) .init : 0x81200000 - 0x81600000 (4096 kB) .data : 0x81600000 - 0x816a38a0 ( 655 kB) .bss : 0x816a5000 - 0x8172256c ( 502 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 NR_IRQS:16 nr_irqs:16 16 arm_arch_timer: Architected cp15 timer(s) running at 8.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns Switching to timer-based delay loop, resolution 125ns Ignoring duplicate/late registration of read_current_timer delay clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=80000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: update cpu_capacity 1024 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x90100000 - 0x90100058 Brought up 1 CPUs SMP: Total of 1 processors activated (16.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 256 (order: 2, 16384 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu DDR type is DDR3! No ATAGs? hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver imx7d-pinctrl 30330000.iomuxc: initialized IMX pinctrl driver MU is ready for cross core communication! GPIO line 13 (MCU_INTB) hogged as input GPIO line 43 (SVEN) hogged as output/high GPIO line 60 (LAN1_INT_N) hogged as input GPIO line 62 (LAN1_COMA_MODE) hogged as output/low GPIO line 85 (EC25_USB_VBUS) hogged as output/low mxs-dma 33000000.dma-apbh: initialized vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb 30800000.aips-bus:usbphynop1 supply vcc not found, using dummy regulator 30800000.aips-bus:usbphynop2 supply vcc not found, using dummy regulator i2c i2c-0: IMX I2C adapter registered i2c i2c-0: can't use DMA, using PIO instead. gpio_bmic 3-0014: version: 2.0 bmic_regulator 3-0016: version: 1.0 i2c i2c-3: IMX I2C adapter registered i2c i2c-3: can't use DMA, using PIO instead. Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered MIPI CSI2 driver module loaded imx rpmsg driver is registered. Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.22 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized random: fast init done armadillo_iotg_addon addon: Atmark Techno RS485 board detected at Add-On Module I/F 1(Rev 2, SerialNumber=2841). armadillo_iotg_addon addon: Atmark Techno RS485 board detected at Add-On Module I/F 2(Rev 2, SerialNumber=2844). clocksource: Switched to clocksource arch_sys_counter VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Bus freq driver module loaded workingset: timestamp_bits=14 max_order=16 bucket_order=2 squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) c 2001-2006 Red Hat, Inc. fuse init (API version 7.26) NET: Registered protocol family 38 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) OF: PCI: host bridge /soc/pcie@0x33800000 ranges: OF: PCI: No bus range found for /soc/pcie@0x33800000, using [bus 00-ff] OF: PCI: IO 0x4ff80000..0x4ff8ffff -> 0x00000000 OF: PCI: MEM 0x40000000..0x4fefffff -> 0x40000000 imx6q-pcie 33800000.pcie: Speed change timeout imx6q-pcie 33800000.pcie: Roll back to GEN1 link! imx6q-pcie 33800000.pcie: Link up, Gen1 imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fefffff] PCI: bus0: Fast back to back transfers disabled PCI: bus1: Fast back to back transfers disabled pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x400fffff] pci 0000:00:00.0: BAR 14: assigned [mem 0x40100000-0x401fffff] pci 0000:00:00.0: BAR 15: assigned [mem 0x40200000-0x402fffff pref] pci 0000:00:00.0: BAR 6: assigned [mem 0x40300000-0x4030ffff pref] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x4017ffff 64bit] pci 0000:01:00.0: BAR 6: assigned [mem 0x40200000-0x4020ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: bridge window [mem 0x40100000-0x401fffff] pci 0000:00:00.0: bridge window [mem 0x40200000-0x402fffff pref] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt imx-sdma 30bd0000.sdma: loaded firmware 4.2 pfuze100-regulator 3-0009: Full layer: 1, Metal layer: 1 pfuze100-regulator 3-0009: FAB: 0, FIN: 0 pfuze100-regulator 3-0009: pfuze3000 found. 30a70000.serial: ttymxc4 at MMIO 0x30a70000 (irq = 45, base_baud = 5000000) is a IMX console [ttymxc4] enabled 30a90000.serial: ttymxc6 at MMIO 0x30a90000 (irq = 46, base_baud = 500000) is a IMX 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 285, base_baud = 5000000) is a IMX 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 286, base_baud = 5000000) is a IMX imx sema4 driver is registered. [drm] Initialized [drm] Initialized vivante 1.0.0 20120216 on minor 0 brd: module loaded loop: module loaded (hci_tty): inside hci_tty_init (hci_tty): allocated 246, 0 libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky CAN device driver interface 30bf0000.ethernet supply phy not found, using dummy regulator pps pps0: new PPS source ptp0 libphy: fec_enet_mii_bus: probed fec 30bf0000.ethernet eth0: registered PHC device 0 PPP generic driver version 2.4.2 ath9k 0000:01:00.0: enabling device (0140 -> 0142) ieee80211 phy0: Atheros AR9462 Rev:3 mem=0x8c280000, irq=287 usbcore: registered new interface driver kaweth pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver rtl8150 usbcore: registered new interface driver r8152 usbcore: registered new interface driver asix usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver cdc_eem usbcore: registered new interface driver smsc95xx usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver sierra_net usbcore: registered new interface driver cdc_ncm usbcore: registered new interface driver qmi_wwan ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver cdc_wdm usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver sierra usbserial: USB Serial support registered for Sierra USB modem usbcore: registered new interface driver usb_serial_simple usbserial: USB Serial support registered for carelink usbserial: USB Serial support registered for zio usbserial: USB Serial support registered for funsoft usbserial: USB Serial support registered for flashloader usbserial: USB Serial support registered for google usbserial: USB Serial support registered for libtransistor usbserial: USB Serial support registered for vivopay usbserial: USB Serial support registered for moto_modem usbserial: USB Serial support registered for motorola_tetra usbserial: USB Serial support registered for novatel_gps usbserial: USB Serial support registered for hp4x usbserial: USB Serial support registered for suunto usbserial: USB Serial support registered for siemens_mpi usbcore: registered new interface driver usb_ehset_test usb3503 3-0008: switched to HUB mode usb3503 3-0008: usb3503_probe: probed in hub mode 30b10200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b30200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b20200.usbmisc supply vbus-wakeup not found, using dummy regulator ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected 30b30000.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.1: EHCI Host Controller ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 ci_hdrc ci_hdrc.1: can't setup: -110 ci_hdrc ci_hdrc.1: USB bus 2 deregistered ci_hdrc ci_hdrc.1: can't start host role ci_hdrc: probe of ci_hdrc.1 failed with error -110 udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers mousedev: PS/2 mouse device common for all mice input: 30370000.snvs:snvs-powerkey as /devices/soc0/soc/30000000.aips-bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0 bmic_rtc 3-0011: version: 1.1 bmic_rtc 3-0011: rtc core: registered bmic_rtc as rtc0 snvs_rtc 30370000.snvs:snvs-rtc-lp: rtc core: registered 30370000.snvs:snvs- as rtc1 i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x/sz) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR SANYO protocol handler initialized IR Sharp protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR XMP protocol handler initialized usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) bmic_thermal 3-0013: version: 1.0 imx2-wdt 30280000.wdog: timeout 10 sec (nowayout=0) Bluetooth: HCI UART driver ver 2.3 Bluetooth: HCI UART protocol H4 registered Bluetooth: HCI UART protocol BCSP registered Bluetooth: HCI UART protocol LL registered Bluetooth: HCI UART protocol ATH3K registered usbcore: registered new interface driver bcm203x usbcore: registered new interface driver btusb usbcore: registered new interface driver ath3k sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-esdhc-imx 30b40000.usdhc: Got CD GPIO sdhci-esdhc-imx 30b40000.usdhc: Got WP GPIO mmc0: SDHCI controller on 30b40000.usdhc [30b40000.usdhc] using ADMA sdhci-esdhc-imx 30b60000.usdhc: could not get ultra high speed state, work on normal mode sdhci-esdhc-imx 30b60000.usdhc: allocated mmc-pwrseq mmc0: new high speed SDHC card at address 1234 mmc2: SDHCI controller on 30b60000.usdhc [30b60000.usdhc] using ADMA mmcblk0: mmc0:1234 SA16G 14.5 GiB mmcblk0: p1 caam 30900000.caam: ERA source: CCBVID. caam 30900000.caam: device ID = 0x0a16030000000000 (Era 8) caam 30900000.caam: job rings = 3, qi = 0 caam algorithms registered in /proc/crypto caam_jr 30901000.jr0: registering rng-caam caam 30900000.caam: caam pkc algorithms registered in /proc/crypto snvs-secvio 30370000.caam-snvs: can't get snvs clock snvs-secvio 30370000.caam-snvs: violation handlers armed - non-secure state usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver r8712u bmic_adc 3-0012: version: 1.0 coresight-etm3x 3007c000.etm: ETM 3.5 initialized ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x74 sysfs: cannot create duplicate filename '/devices/cs_etm/cpu0' Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.9.133-at25 #2 Hardware name: Freescale i.MX7 Dual (Device Tree) [<8010fcfc>] (unwind_backtrace) from [<8010b470>] (show_stack+0x10/0x14) [<8010b470>] (show_stack) from [<80402bf8>] (dump_stack+0x78/0x8c) [<80402bf8>] (dump_stack) from [<801d95ac>] (__warn+0xe4/0x100) [<801d95ac>] (__warn) from [<80131628>] (warn_slowpath_fmt+0x38/0x48) [<80131628>] (warn_slowpath_fmt) from [<80297a30>] (sysfs_warn_dup+0x64/0x74) [<80297a30>] (sysfs_warn_dup) from [<80297d84>] (sysfs_do_create_link_sd+0xc8/0xcc) [<80297d84>] (sysfs_do_create_link_sd) from [<808aa838>] (etm_perf_symlink+0x68/0xc4) [<808aa838>] (etm_perf_symlink) from [<808af2c4>] (etm_probe+0x258/0x2f8) [<808af2c4>] (etm_probe) from [<80496404>] (amba_probe+0xf4/0x158) [<80496404>] (amba_probe) from [<8052a27c>] (driver_probe_device+0x1bc/0x2a8) [<8052a27c>] (driver_probe_device) from [<8052a418>] (__driver_attach+0xb0/0xb4) [<8052a418>] (__driver_attach) from [<805286c8>] (bus_for_each_dev+0x78/0x9c) [<805286c8>] (bus_for_each_dev) from [<80529814>] (bus_add_driver+0x1bc/0x200) [<80529814>] (bus_add_driver) from [<8052aaf0>] (driver_register+0x78/0xf4) [<8052aaf0>] (driver_register) from [<80101778>] (do_one_initcall+0x44/0x180) [<80101778>] (do_one_initcall) from [<81200e38>] (kernel_init_freeable+0x1c8/0x254) [<81200e38>] (kernel_init_freeable) from [<80bb4d94>] (kernel_init+0x8/0x10c) [<80bb4d94>] (kernel_init) from [<80107990>] (ret_from_fork+0x14/0x24) ---[ end trace 7b177f67af251b0a ]--- coresight-etm3x: probe of 3007d000.etm failed with error -17 usbcore: registered new interface driver snd-usb-audio NET: Registered protocol family 26 Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. nf_conntrack version 0.5.0 (3072 buckets, 12288 max) ctnetlink v0.93: registering with nfnetlink. mmc2: new DDR MMC card at address 0001 nf_tables: (c) 2007-2009 Patrick McHardy nf_tables_compat: (c) 2012 Pablo Neira Ayuso xt_time: kernel timezone is -0000 IPVS: Registered protocols () IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: Creating netns size=912 id=0 mmcblk2: mmc2:0001 Q2J55L 3.56 GiB IPVS: ipvs loaded. ipip: IPv4 and MPLS over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver mmcblk2boot0: mmc2:0001 Q2J55L partition 1 2.00 MiB ip_tables: (C) 2000-2006 Netfilter Core Team ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully arp_tables: arp_tables: (C) 2002 David S. Miller mmcblk2boot1: mmc2:0001 Q2J55L partition 2 2.00 MiB Initializing XFRM netlink socket NET: Registered protocol family 10 mmcblk2gp0: mmc2:0001 Q2J55L partition 4 8.00 MiB mip6: Mobile IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team mmcblk2gp1: mmc2:0001 Q2J55L partition 5 8.00 MiB sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver ip6_gre: GRE over IPv6 tunneling driver NET: Registered protocol family 17 mmcblk2gp2: mmc2:0001 Q2J55L partition 6 8.00 MiB NET: Registered protocol family 15 Bridge firewalling registered can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 mmcblk2gp3: mmc2:0001 Q2J55L partition 7 8.00 MiB can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20161123 t) can: netlink gateway (rev 20130117) max_hops=1 mmcblk2rpmb: mmc2:0001 Q2J55L partition 3 4.00 MiB Bluetooth: RFCOMM TTY layer initialized mmcblk2: p1 p2 p3 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered ThumbEE CPU extension supported. imx_thermal 30000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C dhd_module_init in input: gpio-keys as /devices/soc0/gpio-keys/input/input1 bmic_rtc 3-0011: setting system clock to 2022-11-11 06:51:47 UTC (1668149507) ALSA device list: No soundcards found. Warning: unable to open an initial console. Freeing unused kernel memory: 4096K systemd-udevd[206]: starting version 215 random: systemd-udevd: uninitialized urandom read (16 bytes read) EXT4-fs (mmcblk2p2): recovery complete EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null) cgroup: cgroup2: unknown option "nsdelegate" systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 10 (buster)! systemd[1]: Set hostname to . systemd-system-update-generator[268]: Offline system update overridden by kernel command line systemd.unit= setting systemd[1]: /lib/systemd/system/xrdp.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp.pid → /run/xrdp/xrdp.pid; please update the unit file accordingly. systemd[1]: /lib/systemd/system/xrdp-sesman.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp-sesman.pid → /run/xrdp/xrdp-sesman.pid; please update the unit file accordingly. random: systemd: uninitialized urandom read (16 bytes read) random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. systemd[1]: Reached target Swap. [ OK ] Reached target Swap. systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... Starting Journal Service... Mounting Kernel Debug File System... Starting Remount Root and Kernel File Systems... [ OK ] Listening on udev Control Socket. [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... [ OK ] Reached target Local Encrypted Volumes. [ OK ] Set up automount Arbitrary…s File System Automount Point. Starting Load Kernel Modules... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Load Kernel Modules. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting Load/Save Random Seed... Starting Create System Users... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Journal Service. [ OK ] Started Apply Kernel Variables. [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. systemd-journald[274]: Received request to flush runtime journal from PID 1 [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. Starting Network Manager... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting Network Manager Wait Online... Starting Hostname Service... IPVS: Creating netns size=912 id=1 [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Vitesse VSC8501 30bf0000.ethernet-1:00: attached PHY driver [Vitesse VSC8501] (mii_bus:phy_addr=30bf0000.ethernet-1:00, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Starting Authorization Manager... Starting WPA supplicant... fec 30bf0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Started Authorization Manager. [ OK ] Started WPA supplicant. nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ OK ] Started Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting Kernel crash dump capture service... kdump-tools[1074]: Starting kdump-tools: running makedumpfile -d 31 -c --message-level 1 /proc/vmcore /var/crash/202211111552/dump-incomplete. kdump-tools[1074]: kdump-tools: makedumpfile failed, falling back to 'cp' ... failed! [ OK ] Found device /dev/license. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Mounting /opt/license... [ OK ] Stopped Kernel crash dump capture service. Starting Load/Save RF Kill Switch Status... Starting Kernel crash dump capture service... [ OK ] Mounted /opt/license. [ OK ] Started Load/Save RF Kill Switch Status. kdump-tools[1837]: Starting kdump-tools: running makedumpfile -d 31 -c --message-level 1 /proc/vmcore /var/crash/202211111552/dump-incomplete. kdump-tools[1837]: kdump-tools: makedumpfile failed, falling back to 'cp' ... failed! random: crng init done random: 6 urandom warning(s) missed due to ratelimiting ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1916 at arch/arm/mm/ioremap.c:303 __arm_ioremap_pfn_caller+0xd8/0x1b4 Modules linked in: CPU: 0 PID: 1916 Comm: cp Tainted: G W 4.9.133-at25 #2 Hardware name: Freescale i.MX7 Dual (Device Tree) [<8010fcfc>] (unwind_backtrace) from [<8010b470>] (show_stack+0x10/0x14) [<8010b470>] (show_stack) from [<80402bf8>] (dump_stack+0x78/0x8c) [<80402bf8>] (dump_stack) from [<801d95ac>] (__warn+0xe4/0x100) [<801d95ac>] (__warn) from [<801316a0>] (warn_slowpath_null+0x20/0x28) [<801316a0>] (warn_slowpath_null) from [<80116468>] (__arm_ioremap_pfn_caller+0xd8/0x1b4) [<80116468>] (__arm_ioremap_pfn_caller) from [<80116588>] (__arm_ioremap_caller+0x44/0x54) [<80116588>] (__arm_ioremap_caller) from [<8010ff70>] (copy_oldmem_page+0x28/0xcc) [<8010ff70>] (copy_oldmem_page) from [<80292570>] (read_from_oldmem.part.0+0xb0/0xd8) [<80292570>] (read_from_oldmem.part.0) from [<8029275c>] (read_vmcore+0x160/0x2ac) [<8029275c>] (read_vmcore) from [<802852c0>] (proc_reg_read+0x5c/0x84) [<802852c0>] (proc_reg_read) from [<802292cc>] (__vfs_read+0x1c/0x110) [<802292cc>] (__vfs_read) from [<8022a0f8>] (vfs_read+0x8c/0x10c) [<8022a0f8>] (vfs_read) from [<8022af20>] (SyS_read+0x3c/0x90) [<8022af20>] (SyS_read) from [<801078c0>] (ret_fast_syscall+0x0/0x48) ---[ end trace 7b177f67af251b0c ]--- kdump-tools[1837]: cp: '/proc/vmcore' の読み込みエラー: メモリを確保できません kdump-tools[1837]: kdump-tools: failed to save vmcore in /var/crash/202211111552 ... failed! kdump-tools[1837]: running makedumpfile --dump-dmesg /proc/vmcore /var/crash/202211111552/dmesg.202211111552. kdump-tools[1837]: check_release: Can't get the kernel version. kdump-tools[1837]: The kernel version is not supported. kdump-tools[1837]: The makedumpfile operation may be incomplete. kdump-tools[1837]: makedumpfile Failed. ci_hdrc ci_hdrc.0: remove, state 4 usb usb1: USB disconnect, device number 1 ci_hdrc ci_hdrc.0: USB bus 1 deregistered imx2-wdt 30280000.wdog: Device shutdown: Expect reboot! reboot: Restarting system U-Boot SPL 2016.07-at23 (Nov 10 2022 - 15:55:15) Trying to boot from MMC2 U-Boot 2016.07-at23 (Nov 10 2022 - 15:55:15 +0900) CPU: Freescale i.MX7D rev1.2 at 996MHz CPU: Extended Commercial temperature grade (-20C to 105C) at 59C Reset cause: POR Watchdog enabled I2C: ready DRAM: 1 GiB Boot Source: eMMC Board Type: Armadillo-IoT G3 M1(0a000003) Revision: 0001 S/N: 00A000010119 DRAM: 00001e05 XTAL: 00 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment Failed (-5) Loading Environment from MMC... *** Warning - bad CRC, using default environment Failed (-5) In: serial Out: serial Err: serial Found PFUZE300! deviceid 0x30, revid 0x11 Net: FEC0 switch to partitions #0, OK mmc1(part 0) is current device switch to partitions #0, OK mmc1(part 0) is current device reading boot.scr ** Unable to read file boot.scr ** reading boot.scr ** Unable to read file boot.scr ** reading uImage 12152536 bytes read in 297 ms (39 MiB/s) Booting from mmc ... reading armadillo_iotg_g3_m1.dtb 54740 bytes read in 19 ms (2.7 MiB/s) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-4.9.133-at25 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 12152472 Bytes = 11.6 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK ## Flattened Device Tree blob at 84800000 Booting using the fdt blob at 0x84800000 Loading Kernel Image ... OK Using Device Tree in place at 84800000, end 848105d3 Starting kernel ... Booting Linux on physical CPU 0x0 Linux version 4.9.133-at25 (atmark@atde8) (gcc version 8.3.0 (Debian 8.3.0-2) ) #2 SMP PREEMPT Thu Nov 10 16:13:41 JST 2022 CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d CPU: div instructions available: patching division code CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache OF: fdt:Machine model: Atmark-Techno Armadillo-IoT Gateway G3 M1 Board Reserved memory: created CMA memory pool at 0xac000000, size 320 MiB OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool Memory policy: Data cache writealloc Reserving 192MB of memory at 2432MB for crashkernel (System RAM: 1024MB) percpu: Embedded 14 pages/cpu @ab61a000 s26636 r8192 d22516 u57344 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840 Kernel command line: console=ttymxc4,115200 root=/dev/mmcblk2p2 rootwait rw crashkernel=192M PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 490636K/1048576K available (11264K kernel code, 654K rwdata, 5028K rodata, 4096K init, 501K bss, 230260K reserved, 327680K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xc0800000 - 0xff800000 (1008 MB) lowmem : 0x80000000 - 0xc0000000 (1024 MB) pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) modules : 0x7f000000 - 0x7fe00000 ( 14 MB) .text : 0x80008000 - 0x80c00000 (12256 kB) .init : 0x81200000 - 0x81600000 (4096 kB) .data : 0x81600000 - 0x816a38a0 ( 655 kB) .bss : 0x816a5000 - 0x8172256c ( 502 kB) SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 arm_arch_timer: Architected cp15 timer(s) running at 8.00MHz (phys). clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns Switching to timer-based delay loop, resolution 125ns Ignoring duplicate/late registration of read_current_timer delay clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=80000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Testing write buffer coherency: ok CPU0: update cpu_capacity 1024 CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x80100000 - 0x80100058 CPU1: update cpu_capacity 1024 CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 Brought up 2 CPUs SMP: Total of 2 processors activated (32.00 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns futex hash table entries: 512 (order: 3, 32768 bytes) pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor ladder cpuidle: using governor menu DDR type is DDR3! No ATAGs? hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. hw-breakpoint: maximum watchpoint size is 8 bytes. imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver imx7d-pinctrl 30330000.iomuxc: initialized IMX pinctrl driver MU is ready for cross core communication! GPIO line 13 (MCU_INTB) hogged as input GPIO line 43 (SVEN) hogged as output/high GPIO line 60 (LAN1_INT_N) hogged as input GPIO line 62 (LAN1_COMA_MODE) hogged as output/low GPIO line 85 (EC25_USB_VBUS) hogged as output/low mxs-dma 33000000.dma-apbh: initialized vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb 30800000.aips-bus:usbphynop1 supply vcc not found, using dummy regulator 30800000.aips-bus:usbphynop2 supply vcc not found, using dummy regulator i2c i2c-0: IMX I2C adapter registered i2c i2c-0: can't use DMA, using PIO instead. gpio_bmic 3-0014: version: 2.0 bmic_regulator 3-0016: version: 1.0 i2c i2c-3: IMX I2C adapter registered i2c i2c-3: can't use DMA, using PIO instead. Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered MIPI CSI2 driver module loaded imx rpmsg driver is registered. Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.22 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized random: fast init done armadillo_iotg_addon addon: Atmark Techno RS485 board detected at Add-On Module I/F 1(Rev 2, SerialNumber=2841). armadillo_iotg_addon addon: Atmark Techno RS485 board detected at Add-On Module I/F 2(Rev 2, SerialNumber=2844). clocksource: Switched to clocksource arch_sys_counter VFS: Disk quotas dquot_6.6.0 VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Bus freq driver module loaded workingset: timestamp_bits=14 max_order=18 bucket_order=4 squashfs: version 4.0 (2009/01/31) Phillip Lougher NFS: Registering the id_resolver key type Key type id_resolver registered Key type id_legacy registered jffs2: version 2.2. (NAND) c 2001-2006 Red Hat, Inc. fuse init (API version 7.26) NET: Registered protocol family 38 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) OF: PCI: host bridge /soc/pcie@0x33800000 ranges: OF: PCI: No bus range found for /soc/pcie@0x33800000, using [bus 00-ff] OF: PCI: IO 0x4ff80000..0x4ff8ffff -> 0x00000000 OF: PCI: MEM 0x40000000..0x4fefffff -> 0x40000000 imx6q-pcie 33800000.pcie: Speed change timeout imx6q-pcie 33800000.pcie: Roll back to GEN1 link! imx6q-pcie 33800000.pcie: Link up, Gen1 imx6q-pcie 33800000.pcie: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fefffff] PCI: bus0: Fast back to back transfers disabled PCI: bus1: Fast back to back transfers disabled pci 0000:00:00.0: BAR 0: assigned [mem 0x40000000-0x400fffff] pci 0000:00:00.0: BAR 14: assigned [mem 0x40100000-0x401fffff] pci 0000:00:00.0: BAR 15: assigned [mem 0x40200000-0x402fffff pref] pci 0000:00:00.0: BAR 6: assigned [mem 0x40300000-0x4030ffff pref] pci 0000:01:00.0: BAR 0: assigned [mem 0x40100000-0x4017ffff 64bit] pci 0000:01:00.0: BAR 6: assigned [mem 0x40200000-0x4020ffff pref] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: bridge window [mem 0x40100000-0x401fffff] pci 0000:00:00.0: bridge window [mem 0x40200000-0x402fffff pref] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt imx-sdma 30bd0000.sdma: loaded firmware 4.2 pfuze100-regulator 3-0009: Full layer: 1, Metal layer: 1 pfuze100-regulator 3-0009: FAB: 0, FIN: 0 pfuze100-regulator 3-0009: pfuze3000 found. 30a70000.serial: ttymxc4 at MMIO 0x30a70000 (irq = 45, base_baud = 5000000) is a IMX console [ttymxc4] enabled 30a90000.serial: ttymxc6 at MMIO 0x30a90000 (irq = 46, base_baud = 500000) is a IMX 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 285, base_baud = 5000000) is a IMX 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 286, base_baud = 5000000) is a IMX imx sema4 driver is registered. [drm] Initialized [drm] Initialized vivante 1.0.0 20120216 on minor 0 brd: module loaded loop: module loaded (hci_tty): inside hci_tty_init (hci_tty): allocated 246, 0 libphy: Fixed MDIO Bus: probed tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky CAN device driver interface 30bf0000.ethernet supply phy not found, using dummy regulator pps pps0: new PPS source ptp0 libphy: fec_enet_mii_bus: probed fec 30bf0000.ethernet eth0: registered PHC device 0 PPP generic driver version 2.4.2 ath9k 0000:01:00.0: enabling device (0140 -> 0142) ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xc0a80000, irq=287 usbcore: registered new interface driver kaweth pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new interface driver pegasus usbcore: registered new interface driver rtl8150 usbcore: registered new interface driver r8152 usbcore: registered new interface driver asix usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver cdc_eem usbcore: registered new interface driver smsc95xx usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver sierra_net usbcore: registered new interface driver cdc_ncm usbcore: registered new interface driver qmi_wwan ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-mxc: Freescale On-Chip EHCI Host driver usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver cdc_wdm usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver sierra usbserial: USB Serial support registered for Sierra USB modem usbcore: registered new interface driver usb_serial_simple usbserial: USB Serial support registered for carelink usbserial: USB Serial support registered for zio usbserial: USB Serial support registered for funsoft usbserial: USB Serial support registered for flashloader usbserial: USB Serial support registered for google usbserial: USB Serial support registered for libtransistor usbserial: USB Serial support registered for vivopay usbserial: USB Serial support registered for moto_modem usbserial: USB Serial support registered for motorola_tetra usbserial: USB Serial support registered for novatel_gps usbserial: USB Serial support registered for hp4x usbserial: USB Serial support registered for suunto usbserial: USB Serial support registered for siemens_mpi usbcore: registered new interface driver usb_ehset_test usb3503 3-0008: switched to HUB mode usb3503 3-0008: usb3503_probe: probed in hub mode 30b10200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b30200.usbmisc supply vbus-wakeup not found, using dummy regulator 30b20200.usbmisc supply vbus-wakeup not found, using dummy regulator ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected 30b30000.usb supply vbus not found, using dummy regulator ci_hdrc ci_hdrc.1: EHCI Host Controller ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers mousedev: PS/2 mouse device common for all mice input: 30370000.snvs:snvs-powerkey as /devices/soc0/soc/30000000.aips-bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0 bmic_rtc 3-0011: version: 1.1 bmic_rtc 3-0011: rtc core: registered bmic_rtc as rtc0 snvs_rtc 30370000.snvs:snvs-rtc-lp: rtc core: registered 30370000.snvs:snvs- as rtc1 i2c /dev entries driver IR NEC protocol handler initialized IR RC5(x/sz) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR SANYO protocol handler initialized IR Sharp protocol handler initialized IR MCE Keyboard/mouse protocol handler initialized IR XMP protocol handler initialized usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) bmic_thermal 3-0013: version: 1.0 imx2-wdt 30280000.wdog: timeout 10 sec (nowayout=0) Bluetooth: HCI UART driver ver 2.3 Bluetooth: HCI UART protocol H4 registered Bluetooth: HCI UART protocol BCSP registered Bluetooth: HCI UART protocol LL registered Bluetooth: HCI UART protocol ATH3K registered usbcore: registered new interface driver bcm203x usbcore: registered new interface driver btusb usbcore: registered new interface driver ath3k sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper sdhci-esdhc-imx 30b40000.usdhc: Got CD GPIO sdhci-esdhc-imx 30b40000.usdhc: Got WP GPIO mmc0: SDHCI controller on 30b40000.usdhc [30b40000.usdhc] using ADMA sdhci-esdhc-imx 30b60000.usdhc: could not get ultra high speed state, work on normal mode sdhci-esdhc-imx 30b60000.usdhc: allocated mmc-pwrseq usb 2-1: new high-speed USB device number 2 using ci_hdrc mmc2: SDHCI controller on 30b60000.usdhc [30b60000.usdhc] using ADMA caam 30900000.caam: ERA source: CCBVID. caam 30900000.caam: Entropy delay = 3200 caam 30900000.caam: Instantiated RNG4 SH0 caam 30900000.caam: Instantiated RNG4 SH1 caam 30900000.caam: device ID = 0x0a16030000000000 (Era 8) mmc2: new DDR MMC card at address 0001 caam 30900000.caam: job rings = 3, qi = 0 mmcblk2: mmc2:0001 Q2J55L 3.56 GiB caam algorithms registered in /proc/crypto mmcblk2boot0: mmc2:0001 Q2J55L partition 1 2.00 MiB caam_jr 30901000.jr0: registering rng-caam caam 30900000.caam: caam pkc algorithms registered in /proc/crypto snvs-secvio 30370000.caam-snvs: can't get snvs clock mmcblk2boot1: mmc2:0001 Q2J55L partition 2 2.00 MiB snvs-secvio 30370000.caam-snvs: violation handlers armed - non-secure state usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver r8712u bmic_adc 3-0012: version: 1.0 coresight-etm3x 3007c000.etm: ETM 3.5 initialized coresight-etm3x 3007d000.etm: ETM 3.5 initialized usbcore: registered new interface driver snd-usb-audio NET: Registered protocol family 26 Netfilter messages via NETLINK v0.30. nfnl_acct: registering with nfnetlink. nf_conntrack version 0.5.0 (13312 buckets, 53248 max) ctnetlink v0.93: registering with nfnetlink. nf_tables: (c) 2007-2009 Patrick McHardy nf_tables_compat: (c) 2012 Pablo Neira Ayuso xt_time: kernel timezone is -0000 IPVS: Registered protocols () IPVS: Connection hash table configured (size=4096, memory=32Kbytes) IPVS: Creating netns size=912 id=0 IPVS: ipvs loaded. ipip: IPv4 and MPLS over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully arp_tables: arp_tables: (C) 2002 David S. Miller Initializing XFRM netlink socket NET: Registered protocol family 10 mip6: Mobile IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver ip6_gre: GRE over IPv6 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20161123 t) can: netlink gateway (rev 20130117) max_hops=1 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized 8021q: 802.1Q VLAN Support v1.8 Key type dns_resolver registered hub 2-1:1.0: USB hub found hub 2-1:1.0: 3 ports detected ThumbEE CPU extension supported. imx_thermal 30000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C mmcblk2gp0: mmc2:0001 Q2J55L partition 4 8.00 MiB mmcblk2gp1: mmc2:0001 Q2J55L partition 5 8.00 MiB mmc0: new ultra high speed SDR50 SDHC card at address 1234 mmcblk0: mmc0:1234 SA16G 14.5 GiB mmcblk0: p1 mmcblk2gp2: mmc2:0001 Q2J55L partition 6 8.00 MiB mmcblk2gp3: mmc2:0001 Q2J55L partition 7 8.00 MiB mmcblk2rpmb: mmc2:0001 Q2J55L partition 3 4.00 MiB mmcblk2: p1 p2 p3 usb 2-1.2: new high-speed USB device number 3 using ci_hdrc option 2-1.2:1.0: GSM modem (1-port) converter detected usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB0 option 2-1.2:1.1: GSM modem (1-port) converter detected usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB1 option 2-1.2:1.2: GSM modem (1-port) converter detected usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB2 dhd_module_init in input: gpio-keys as /devices/soc0/gpio-keys/input/input1 option 2-1.2:1.3: GSM modem (1-port) converter detected usb 2-1.2: GSM modem (1-port) converter now attached to ttyUSB3 bmic_rtc 3-0011: setting system clock to 2022-11-11 06:53:17 UTC (1668149597) VLDO2: disabling ALSA device list: No soundcards found. Warning: unable to open an initial console. Freeing unused kernel memory: 4096K usb 2-1.3: new full-speed USB device number 4 using ci_hdrc systemd-udevd[214]: starting version 215 random: systemd-udevd: uninitialized urandom read (16 bytes read) usb 2-1.3: USB disconnect, device number 4 usb 2-1.3: new full-speed USB device number 5 using ci_hdrc EXT4-fs (mmcblk2p2): recovery complete EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null) cgroup: cgroup2: unknown option "nsdelegate" systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) systemd[1]: Detected architecture arm. Welcome to Debian GNU/Linux 10 (buster)! systemd[1]: Set hostname to . systemd[1]: /lib/systemd/system/xrdp.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp.pid → /run/xrdp/xrdp.pid; please update the unit file accordingly. systemd[1]: /lib/systemd/system/xrdp-sesman.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/xrdp/xrdp-sesman.pid → /run/xrdp/xrdp-sesman.pid; please update the unit file accordingly. random: systemd: uninitialized urandom read (16 bytes read) random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. random: systemd: uninitialized urandom read (16 bytes read) systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. systemd[1]: Starting udev Coldplug all Devices... Starting udev Coldplug all Devices... Starting Remount Root and Kernel File Systems... [ OK ] Created slice system-getty.slice. Starting Load Kernel Modules... [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Kernel Debug File System... Mounting POSIX Message Queue File System... [ OK ] Listening on Journal Socket (/dev/log). [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ OK ] Created slice User and Session Slice. [ OK ] Listening on Syslog Socket. Starting Journal Service... [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Set up automount Arbitrary…s File System Automount Point. [ OK ] Reached target Swap. [ OK ] Reached target Slices. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Paths. [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Load Kernel Modules. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted POSIX Message Queue File System. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... Starting Load/Save Random Seed... Starting Create System Users... Starting Flush Journal to Persistent Storage... [ OK ] Started udev Coldplug all Devices. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started Load/Save Random Seed. [ OK ] Started Create System Users. systemd-journald[288]: Received request to flush runtime journal from PID 1 Starting Create Static Device Nodes in /dev... [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Enable support fo…l executable binary formats... Mounting Arbitrary Executable File Formats File System... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. [ OK ] Mounted Arbitrary Executable File Formats File System. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Enable support for…nal executable binary formats. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting Restore /etc/reso… the ppp link was shut down... [ OK ] Started Regular background program processing daemon. Starting EC25 resetting configuration... [ OK ] Started Power off EC25 safely. [ OK ] Started D-Bus System Message Bus. Starting WPA supplicant... [ OK ] Started Daily Cleanup of Temporary Directories. Starting Avahi mDNS/DNS-SD Stack... Starting Deferred execution scheduler... Starting LSB: Load kernel …d to enable cpufreq scaling... Starting LSB: Execute the …-e command to reboot system... Starting System Logging Service... Starting Network Manager... Starting Login Service... [ OK ] Reached target System Time Synchronized. [ OK ] Started Daily apt download activities. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily man-db regeneration. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started Restore /etc/resol…re the ppp link was shut down. [ OK ] Started System Logging Service. [ OK ] Started Deferred execution scheduler. [ OK ] Started LSB: Execute the k…c -e command to reboot system. [ OK ] Started Login Service. [ OK ] Started Avahi mDNS/DNS-SD Stack. Starting LSB: Load kernel image with kexec... [ OK ] Started WPA supplicant. [ OK ] Started Network Manager. [ OK ] Started LSB: Load kernel image with kexec. [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... Starting Hostname Service... [ OK ] Reached target Network. IPVS: Creating netns size=912 id=1 Starting Advanced IEEE 802…/WPA/WPA2/EAP Authenticator... Starting OpenBSD Secure Shell server... Starting vsftpd FTP server... Starting Connection Recover... Starting xrdp session manager... Starting Permit User Sessions... Starting dnsmasq - A light…DHCP and caching DNS server... IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready Starting Network Manager Wait Online... [ OK ] Started vsftpd FTP server. [ OK ] Started Permit User Sessions. [ OK ] Started Connection Recover. IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ OK ] Started xrdp session manager. [ OK ] Started Advanced IEEE 802.…1X/WPA/WPA2/EAP Authenticator. [ OK ] Started LSB: set CPUFreq kernel parameters. Starting xrdp daemon... [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started dnsmasq - A lightw…t DHCP and caching DNS server. [ OK ] Reached target Host and Network Name Lookups. IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Vitesse VSC8501 30bf0000.ethernet-1:00: attached PHY driver [Vitesse VSC8501] (mii_bus:phy_addr=30bf0000.ethernet-1:00, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started xrdp daemon. [ OK ] Found device /dev/ttymxc4. fec 30bf0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ OK ] Found device /dev/license. nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ OK ] Started Network Manager Wait Online. [ OK ] Started EC25 resetting configuration. Starting Bluetooth service... [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch. Starting Modem Manager... [ OK ] Reached target Network is Online. Starting Kernel crash dump capture service... Starting LSB: exim Mail Transport Agent... Starting Mosquitto MQTT v3.1/v3.1.1 Broker... Starting /etc/rc.local Compatibility... Mounting /opt/license... Starting Authorization Manager... rc.local[2313]: mkdir: ディレクトリ `/home/atmark/RAM' を作成できません: ファイ ルが存在します [ OK ] Mounted /opt/license. [ OK ] Started Bluetooth service. FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Started Authorization Manager. [ OK ] Started Mosquitto MQTT v3.1/v3.1.1 Broker. [ OK ] Started Modem Manager. Starting Load/Save RF Kill Switch Status... [ OK ] Started Remote tcp connection service. [ OK ] Started Serial Getty on ttymxc4. [ OK ] Started reset usb3503. [ OK ] Started Remote tcp command service. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. Starting change status LED... Starting input event poweroff daemon... Starting set thermal critical and passive trip point... [ OK ] Reached target Bluetooth. [ OK ] Started Load/Save RF Kill Switch Status. [ OK ] Started change status LED. [ OK ] Started input event poweroff daemon. [ OK ] Started set thermal critical and passive trip point. kdump-tools[2298]: Starting kdump-tools: Invalid kernel version : 4.9.133-at25 ... failed! kdump-tools[2298]: syscall kexec_file_load not available. kdump-tools[2298]: loaded kdump kernel. [ OK ] Started Kernel crash dump capture service. [ OK ] Started LSB: exim Mail Transport Agent. random: crng init done random: 6 urandom warning(s) missed due to ratelimiting [ OK ] Started OpenBSD Secure Shell server. usb 2-1.2: USB disconnect, device number 3 [ OK ] Reached target Multi-User System. option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 option 2-1.2:1.0: device disconnected option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ OK option 2-1.2:1.1: device disconnected ] Reached target Graphical Interface. option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2 option1 ttyUSB3: usb_wwan_open: submit int urb failed: -19 option1 ttyUSB3: usb_wwan_open: submit read urb 0 failed: -19 option1 ttyUSB3: usb_wwan_open: submit read urb 1 failed: -19 option1 ttyUSB3: usb_wwan_open: submit read urb 2 failed: -19 option1 ttyUSB3: usb_wwan_open: submit read urb 3 failed: -19 option 2-1.2:1.2: device disconnected Starting Update UTMP about System Runlevel Changes... option1 ttyUSB3: GSM modem (1-port) converter now disconnected from ttyUSB3 option 2-1.2:1.3: device disconnected [ OK ] Started Update UTMP about System Runlevel Changes. Debian GNU/Linux 10 armadillo ttymxc4