U-Boot 2018.03-at8 installer+ (Feb 17 2020 - 19:19:21 +0900) CPU: Freescale i.MX6ULL rev1.1 at 396 MHz Reset cause: POR I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 Net: FEC => boot 7633392 bytes read in 386 ms (18.9 MiB/s) 28848 bytes read in 55 ms (511.7 KiB/s) ## Booting kernel from Legacy Image at 82000000 ... Image Name: Linux-4.14-at53 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 7633328 Bytes = 7.3 MiB Load Address: 82000000 Entry Point: 82000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Loading Kernel Image ... OK Loading Device Tree to 9eef9000, end 9ef030af ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.14-at53 (atmark@atde8) (gcc version 8.3.0 (Debia3 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructie [ 0.000000] OF: fdt: Machine model: Atmark Techno Armadillo-640 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] CPU: All CPU(s) started in SVC mode. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920 [ 0.000000] Kernel command line: root=/dev/mmcblk1p2 rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 490884K/524288K available (6144K kernel code, 275K rwdat) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB) [ 0.000000] .init : 0xc0900000 - 0xc0c00000 (3072 kB) [ 0.000000] .data : 0xc0c00000 - 0xc0c44f40 ( 276 kB) [ 0.000000] .bss : 0xc0c4a1cc - 0xc0c875a4 ( 245 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000016] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 8947s [ 0.000051] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffffs [ 0.001924] Console: colour dummy device 80x30 [ 0.002522] console [tty0] enabled [ 0.002592] Calibrating delay loop (skipped), value calculated using timer f) [ 0.002654] pid_max: default: 32768 minimum: 301 [ 0.003071] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.003126] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.004353] CPU: Testing write buffer coherency: ok [ 0.005434] Setting up static identity map for 0x80100000 - 0x80100060 [ 0.007031] devtmpfs: initialized [ 0.017800] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 [ 0.018218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms [ 0.018296] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.019605] pinctrl core: initialized pinctrl subsystem [ 0.022183] NET: Registered protocol family 16 [ 0.024060] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.033029] vdd3p0: supplied by regulator-dummy [ 0.033602] cpu: supplied by regulator-dummy [ 0.034396] vddsoc: supplied by regulator-dummy [ 0.049778] imx6ul-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.050500] imx6ul-pinctrl 2290000.iomuxc-snvs: initialized IMX pinctrl drivr [ 0.079940] SCSI subsystem initialized [ 0.080312] usbcore: registered new interface driver usbfs [ 0.080413] usbcore: registered new interface driver hub [ 0.080609] usbcore: registered new device driver usb [ 0.082155] i2c-gpio i2c-gpio: using pins 117 (SDA) and 120 (SCL) [ 0.083238] Advanced Linux Sound Architecture Driver Initialized. [ 0.084449] Bluetooth: Core ver 2.22 [ 0.084555] NET: Registered protocol family 31 [ 0.084590] Bluetooth: HCI device and connection manager initialized [ 0.084645] Bluetooth: HCI socket layer initialized [ 0.084681] Bluetooth: L2CAP socket layer initialized [ 0.084719] Bluetooth: SCO socket layer initialized [ 0.086001] clocksource: Switched to clocksource mxc_timer1 [ 0.101763] NET: Registered protocol family 2 [ 0.102328] IP idents hash table entries: 8192 (order: 4, 65536 bytes) [ 0.103696] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.103833] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) [ 0.103961] TCP: Hash tables configured (established 4096 bind 4096) [ 0.104169] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.104240] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.104572] NET: Registered protocol family 1 [ 0.105279] RPC: Registered named UNIX socket transport module. [ 0.105337] RPC: Registered udp transport module. [ 0.105369] RPC: Registered tcp transport module. [ 0.105398] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.482862] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 0.499253] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.501273] NFS: Registering the id_resolver key type [ 0.501457] Key type id_resolver registered [ 0.501494] Key type id_legacy registered [ 0.501976] fuse init (API version 7.26) [ 0.510055] NET: Registered protocol family 38 [ 0.510655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major ) [ 0.510723] io scheduler noop registered [ 0.510754] io scheduler deadline registered [ 0.511184] io scheduler cfq registered (default) [ 0.516892] mxsfb 21c8000.lcdif: 21c8000.lcdif supply lcd not found, using dr [ 0.521959] mxsfb 21c8000.lcdif: failed to find mxc display driver [ 0.555633] Console: switching to colour frame buffer device 100x30 [ 0.577915] mxsfb 21c8000.lcdif: initialized [ 0.593330] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 18, base_baud =X [ 0.600232] Console IMX rounded baud rate from 114943 to 114900 [ 0.611777] imx-sdma 20ec000.sdma: loaded firmware 3.3 [ 1.148414] console [ttymxc0] enabled [ 1.160533] 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 52, base_baud =X [ 1.177514] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 53, base_baud =X [ 1.195862] tun: Universal TUN/TAP device driver, 1.6 [ 1.208546] CAN device driver interface [ 1.221359] fec 2188000.ethernet: 2188000.ethernet supply phy not found, usir [ 1.274128] PPP generic driver version 2.4.2 [ 1.286339] usbcore: registered new interface driver awl13 [ 1.299248] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet drr [ 1.314327] usbcore: registered new interface driver pegasus [ 1.327824] usbcore: registered new interface driver rtl8150 [ 1.341222] usbcore: registered new interface driver r8152 [ 1.354303] usbcore: registered new interface driver lan78xx [ 1.367305] usbcore: registered new interface driver asix [ 1.379732] usbcore: registered new interface driver ax88179_178a [ 1.392777] usbcore: registered new interface driver cdc_ether [ 1.405511] usbcore: registered new interface driver net1080 [ 1.417999] usbcore: registered new interface driver cdc_subset [ 1.430521] usbcore: registered new interface driver zaurus [ 1.442455] usbcore: registered new interface driver cdc_ncm [ 1.454084] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.466622] ehci-mxc: Freescale On-Chip EHCI Host driver [ 1.478099] usbcore: registered new interface driver cdc_acm [ 1.489582] cdc_acm: USB Abstract Control Model driver for USB modems and ISs [ 1.503561] usbcore: registered new interface driver usb-storage [ 1.515642] usbcore: registered new interface driver usbserial [ 1.527115] usbcore: registered new interface driver usbserial_generic [ 1.539331] usbserial: USB Serial support registered for generic [ 1.550890] usbcore: registered new interface driver cp210x [ 1.561999] usbserial: USB Serial support registered for cp210x [ 1.573333] usbcore: registered new interface driver ftdi_sio [ 1.584312] usbserial: USB Serial support registered for FTDI USB Serial Deve [ 1.597030] usbcore: registered new interface driver mxuport [ 1.607972] usbserial: USB Serial support registered for MOXA UPort [ 1.619481] usbcore: registered new interface driver pl2303 [ 1.630470] usbserial: USB Serial support registered for pl2303 [ 1.648124] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 1.658889] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 1.696047] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 1.709115] hub 1-0:1.0: USB hub found [ 1.719254] hub 1-0:1.0: 1 port detected [ 1.734689] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 1.746135] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 1.786045] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 1.799750] hub 2-0:1.0: USB hub found [ 1.810347] hub 2-0:1.0: 1 port detected [ 1.822730] udc-core: couldn't find an available UDC - added [g_cdc] to lists [ 1.840077] snvs_rtc 20cc000.snvs:snvs-rtc-lp: registered as rtc0 [ 1.853360] i2c /dev entries driver [ 1.864895] IR NEC protocol handler initialized [ 1.876197] IR RC5(x/sz) protocol handler initialized [ 1.888123] IR RC6 protocol handler initialized [ 1.899381] IR JVC protocol handler initialized [ 1.910414] IR Sony protocol handler initialized [ 1.921471] IR SANYO protocol handler initialized [ 1.932556] IR Sharp protocol handler initialized [ 1.943366] IR MCE Keyboard/mouse protocol handler initialized [ 1.955292] IR XMP protocol handler initialized [ 1.968062] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0) [ 1.980505] usbcore: registered new interface driver btusb [ 1.992405] sdhci: Secure Digital Host Controller Interface driver [ 2.004736] sdhci: Copyright(c) Pierre Ossman [ 2.015128] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.086038] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADA [ 2.141430] mmc0: new DDR MMC card at address 0001 [ 2.153459] mmcblk0: mmc0:0001 S0J35A 3.53 GiB [ 2.164815] mmcblk0boot0: mmc0:0001 S0J35A partition 1 31.5 MiB [ 2.177465] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADA [ 2.194289] mmcblk0boot1: mmc0:0001 S0J35A partition 2 31.5 MiB [ 2.214414] usbcore: registered new interface driver usbhid [ 2.226854] usbhid: USB HID core driver [ 2.237761] mmcblk0gp0: mmc0:0001 S0J35A partition 4 8.00 MiB [ 2.250565] mmcblk0gp1: mmc0:0001 S0J35A partition 5 8.00 MiB [ 2.269743] Netfilter messages via NETLINK v0.30. [ 2.281165] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) [ 2.293986] nf_tables: (c) 2007-2009 Patrick McHardy [ 2.307073] nf_tables_compat: (c) 2012 Pablo Neira Ayuso [ 2.321758] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.335413] NET: Registered protocol family 10 [ 2.350662] mmcblk0gp2: mmc0:0001 S0J35A partition 6 8.00 MiB [ 2.367067] mmcblk0gp3: mmc0:0001 S0J35A partition 7 8.00 MiB [ 2.380258] mmcblk0rpmb: mmc0:0001 S0J35A partition 3 4.00 MiB, chardev (248) [ 2.400120] Segment Routing with IPv6 [ 2.410998] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.425169] NET: Registered protocol family 17 [ 2.436665] can: controller area network core (rev 20170425 abi 9) [ 2.450206] NET: Registered protocol family 29 [ 2.461645] can: raw protocol (rev 20170425) [ 2.472707] can: broadcast manager protocol (rev 20170425 t) [ 2.485169] can: netlink gateway (rev 20170425) max_hops=1 [ 2.498074] mmcblk0: p1 p2 p3 [ 2.512620] Bluetooth: RFCOMM TTY layer initialized [ 2.524375] Bluetooth: RFCOMM socket layer initialized [ 2.536056] Bluetooth: RFCOMM ver 1.11 [ 2.546107] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.557741] Bluetooth: BNEP filters: protocol multicast [ 2.569195] Bluetooth: BNEP socket layer initialized [ 2.580490] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.592740] Bluetooth: HIDP socket layer initialized [ 2.604108] Key type dns_resolver registered [ 2.615305] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 9001 [ 2.642357] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 7921 [ 2.670110] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 5281 [ 2.699044] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 3961 [ 2.728532] cpu cpu0: _opp_add: duplicate OPPs detected. Existing: freq: 1981 [ 2.759305] ThumbEE CPU extension supported. [ 2.778037] mmc1: host does not support reading read-only switch, assuming we [ 2.797838] imx_thermal 2000000.aips-bus:tempmon: Industrial CPU temperatureC [ 2.822903] mmc1: new high speed SDHC card at address 5048 [ 2.835733] mmcblk1: mmc1:5048 SD8GB 7.23 GiB [ 2.848313] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.862963] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-) [ 2.886656] 5V: disabling [ 2.896356] ALSA device list: [ 2.906293] No soundcards found. [ 2.916849] mmcblk1: p1 p2 [ 2.927708] Warning: unable to open an initial console. [ 2.945458] Freeing unused kernel memory: 3072K [ 3.087264] systemd-udevd[84]: starting version 215 [ 3.108517] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 4.251801] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. ) Mounting proc: failed Remounting root rw: [ 4.714138] EXT4-fs (mmcblk1p2): re-mounted. Opts: data=d done Mounting sysfs: failed Mounting devtmpfs on /dev: failed Cleaning up system: done Running local start scripts. Creating mtd devnode: done Starting udevd: done Mounting devpts: done Changing file permissions: done Configure /home/ftp: done Starting syslogd: done Starting klogd: done Mounting tmpfs on /tmp, /var/tmp: done Mounting ramfs on /home/ftp/pub: done Configuring network interfaces: [ 7.466232] SMSC LAN8710/LAN8720 2188000.eth) [ 7.569901] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.20.2) started Sending discover... Sending discover... Sending discover... init eth0 No lease, failing failed Setting hostname: done Starting inetd: done Running local start script (/etc/config/rc.local). *+*+* Install Start!! *+*+* === Step.1 Formatting eMMC === Checking that no-one is using this disk right now ... [ 17.000365] mmcblk0: p1 p2 p3 OK Disk /dev/mmcblk0: 115712 cylinders, 4 heads, 16 sectors/track Old situation: Units = cylinders of 32768 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/mmcblk0p1 32 1009 978 31296 b W95 FAT32 /dev/mmcblk0p2 4917 115711 110795 3545440 83 Linux start: (c,h,s) expected (1023,3,16) found (821,0,1) /dev/mmcblk0p3 1010 4916 3907 125024 b W95 FAT32 /dev/mmcblk0p4 0 - 0 0 0 Empty New situation: Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/mmcblk0p1 2048 64639 62592 b W95 FAT32 /dev/mmcblk0p2 0 - 0 0 Empty /dev/mmcblk0p3 64640 314687 250048 b W95 FAT32 /dev/mmcblk0p4 0 - 0 0 Empty Warning: no primary partition is marked bootable (active) This does not matter for LILO, but the DOS MBR will not boot this disk. Successfully wrote the new partition table Re-reading the partition table ... [ 17.210345] mmcblk0: p1 p3 If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).) Command (m for help): Partition type: p primary (2 primary, 0 extended, 2 free) e extended Select (default p): Partition number (1-4, default 2): First sector (314688-7408 Last sector, +sectors or +size{K,M,G} (314688-7405567, default 7405567): Usi[ 3 ng default value 7405567 Command (m for help): Partition number (1-4): Hex code (type L to list codes): Command (m for help): Disk /dev/mmcblk0: 3791 MB, 3791650816 bytes 4 heads, 16 sectors/track, 115712 cylinders, total 7405568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/mmcblk0p1 2048 64639 31296 b W95 FAT32 /dev/mmcblk0p2 314688 7405567 3545440 83 Linux /dev/mmcblk0p3 64640 314687 125024 b W95 FAT32 Partition table entries are not in disk order Command (m for help): The partition table has been altered! Calling ioctl() to re-read partition table. Syncing disks. mkfs.vfat 2.11 (12 Mar 2005) mke2fs 1.42.5 (29-Jul-2012) Discarding device blocks: [ 17.786064] random: crng init done done Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 221760 inodes, 886360 blocks 44318 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=910163968 28 block groups 32768 blocks per group, 32768 fragments per group 7920 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done mkfs.vfat 2.11 (12 Mar 2005) Disk /dev/mmcblk0: 3791 MB, 3791650816 bytes 4 heads, 16 sectors/track, 115712 cylinders, total 7405568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/mmcblk0p1 2048 64639 31296 b W95 FAT32 /dev/mmcblk0p2 314688 7405567 3545440 83 Linux /dev/mmcblk0p3 64640 314687 125024 b W95 FAT32 Partition table entries are not in disk order === Step.2 Setup Partition === /images/debian-buster-armhf-a600-20210224.tar.gz: OK [ 30.373554] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. ) /images/uImage: OK [ 135.921415] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. ) uImage /images/a640.dtb: OK [ 136.349048] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. ) a640.dtb uImage === Step.3 Setup Bootloader === /images/u-boot.imx: OK 295+0 records in 295+0 records out 302080 bytes (295.0KB) copied, 0.044413 seconds, 6.5MB/s 512+0 records in 512+0 records out 524288 bytes (512.0KB) copied, 0.074039 seconds, 6.8MB/s 512+0 records in 512+0 records out 524288 bytes (512.0KB) copied, 0.102055 seconds, 4.9MB/s === Step.4 sync === Write Protect Groups 0-0 (Blocks 0-16383), Temporary Write Protection *+*+* Install Completed!! *+*+*