U-Boot 2020.04-at20 (Oct 24 2023 - 04:16:30 +0000)

CPU:   i.MX6ULL rev1.1 at 396 MHz
Model: Atmark Techno Armadillo-IoT Gateway A6E Board
DRAM:  512 MiB
WDT:   Started with servicing (10s timeout)
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    mxc_serial
Out:   mxc_serial
Err:   mxc_serial
switch to partitions #0, OK
mmc0(part 0) is current device
flash target is MMC:0
Net:
Warning: ethernet@2188000 using MAC address from ROM
eth0: ethernet@2188000
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc0(part 0) is current device
6383312 bytes read in 147 ms (41.4 MiB/s)
Booting from mmc ...
39966 bytes read in 6 ms (6.4 MiB/s)
Loading fdt boot/armadillo.dtb
76 bytes read in 3 ms (24.4 KiB/s)
2366 bytes read in 4 ms (577.1 KiB/s)
Applying fdt overlay: armadillo-iotg-a6e-els31.dtbo
3038 bytes read in 3 ms (988.3 KiB/s)
Applying fdt overlay: armadillo-iotg-a6e-lwb5plus.dtbo
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Linux-5.10.199-0-at
   Created:      2023-10-26   9:14:02 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    6383248 Bytes = 6.1 MiB
   Load Address: 82000000
   Entry Point:  82000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83500000
   Booting using the fdt blob at 0x83500000
   Loading Kernel Image
   Loading Device Tree to 9ef1c000, end 9ef48fff ... OK

Starting kernel ...


   OpenRC 0.48 is starting up Linux 5.10.199-0-at (armv7l)

 * Mounting /proc ... [ ok ]
 * Mounting /run ... [ ok ]
 * /run/openrc: creating directory
 * /run/lock: creating directory
 * /run/lock: correcting owner
 * Caching service dependencies ... [ ok ]
 * Mounting /sys ... * Remounting devtmpfs on /dev ... [ ok ]
 [ ok ]
 * Mounting security filesystem ... [ ok ]
 * Mounting config filesystem ... [ ok ]
 * Mounting /dev/mqueue ... [ ok ]
 * Mounting /dev/pts ... [ ok ]
 * Mounting /dev/shm ... [ ok ]
udev                     | * Starting udev ... [ ok ]
fsck_atlog               | * Checking log filesystems ... * Clearing dirty bit of /dev/mmcblk0gp1. This is sign of unclean shutdown
fsck                     | * Checking local filesystems  ...fsck_atlog               | * /dev/mmcblk0p3 was not unmounted properly, running fsck
 [ ok ]
root                     | * Remounting filesystems ...fsck_atlog               | [ ok ]
 [ ok ]
localmount               | * Mounting local filesystems ... [ ok ]
overlayfs                | * Preparing overlayfs over / ... [ ok ]
hostname                 | * Setting hostname ...udev-trigger             | * Generating a rule to create a /dev/root symlink ...sysctl                   | * Configuring kernel parameters ... [ ok ]
 [ ok ]
udev-trigger             | * Populating /dev with existing devices through uevents ... [ ok ]
 [ ok ]
bootmisc                 | * Migrating /var/lock to /run/lock ... [ ok ]
bootmisc                 | * Creating user login records ... [ ok ]
bootmisc                 | * Wiping /var/tmp directory ... [ ok ]
dbus                     | * /run/dbus: creating directory
dbus                     | * /run/dbus: correcting owner
syslog                   | * Starting busybox syslog ...dbus                     | * Starting System Message Bus ... [ ok ]
 [ ok ]
klogd                    | * Starting busybox klogd ... [ ok ]
modemmanager             | * Starting modemmanager ... [ ok ]
networkmanager           | * Starting networkmanager ... [ ok ]
dnsmasq                  | * /var/lib/misc/dnsmasq.leases: creating file
dnsmasq                  | * /var/lib/misc/dnsmasq.leases: correcting owner
dnsmasq                  | * Starting dnsmasq ... [ ok ]
buttond                  | * Starting button watching daemon ...reset_bootcount          | * Resetting bootcount in bootloader env ...wwan-led                 | * Starting wwan-led ...Environment OK, copy 1
reset_bootcount          | [ ok ]
 [ ok ]
 [ ok ]
connection-recover       | * Starting connection-recover ...podman-atmark            | * Starting configured podman containers ...zramswap                 | * Creating zram swap device ... [ ok ]
iptables                 | * Loading iptables state and starting firewall ... [ ok ]
 [ ok ]
avahi-daemon             | * Starting avahi-daemon ...atmark-power-utils       | * Starting atmark-power-utils ...chronyd                  | * Starting chronyd ... [ ok ]
 [ ok ]
sshd                     |ssh-keygen: generating new host keys: RSA Starting 'a6e-gw-container'
abos-web                 | * Starting abos-web ... [ ok ]
 [ ok ]
podman-atmark            |40cfcf80e2da3dbb5f11534bddfe9f80b03604f366c466818b24dbc874bedea8
podman-atmark            | [ ok ]
local                    | * local: waiting for sshd (50 seconds)
local                    | * local: waiting for sshd (41 seconds)
local                    | * local: waiting for sshd (32 seconds)
ECDSA ED25519
sshd                     | * Starting sshd ... [ ok ]
local                    | * Starting local ... [ ok ]

Welcome to Alpine Linux 3.18
Kernel 5.10.199-0-at on an armv7l (/dev/ttymxc2)

armadillo login: