U-Boot 2020.04-at20 (Oct 24 2023 - 04:16:30 +0000)
CPU: i.MX6ULL rev1.1 at 396 MHz
Model: Atmark Techno Armadillo-600 Series
DRAM: 512 MiB
setup_rtc_disarm_alarm: Can't find bus
WDT: Started with servicing (10s timeout)
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In: mxc_serial
Out: mxc_serial
Err: mxc_serial
switch to partitions #0, OK
mmc0(part 0) is current device
flash target is MMC:0
Net: eth0: ethernet@2188000
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
6386200 bytes read in 148 ms (41.2 MiB/s)
Booting from mmc ...
38353 bytes read in 5 ms (7.3 MiB/s)
Loading fdt boot/armadillo-640.dtb
45 bytes read in 4 ms (10.7 KiB/s)
4413 bytes read in 4 ms (1.1 MiB/s)
Applying fdt overlay: armadillo-640-lcd70ext-l00.dtbo
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-5.10.209-0-at
Created: 2024-01-29 0:48:20 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 6386136 Bytes = 6.1 MiB
Load Address: 82000000
Entry Point: 82000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 83500000
Booting using the fdt blob at 0x83500000
Loading Kernel Image
Loading Device Tree to 9ef1c000, end 9ef48fff ... OK
Starting kernel ...
OpenRC 0.48 is starting up Linux 5.10.209-0-at (armv7l)
* Mounting /proc ... [ ok ]
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Clock skew detected with `/etc/init.d'
* Adjusting mtime of `/run/openrc/deptree' to Mon Jan 29 11:16:36 2024
* WARNING: clock skew detected!
* Remounting devtmpfs on /dev ... * Mounting /sys ... [ ok ]
[ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting config filesystem ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting /dev/pts ... [ ok ]
* Mounting /dev/shm ... [ ok ]
udev | * Starting udev ... [ ok ]
fsck_atlog | * Checking log filesystems ... * Clearing dirty bit of /dev/mmcblk0gp1. This is sign of unclean shutdown
fsck | * Checking local filesystems ...fsck_atlog | * /dev/mmcblk0p3 was not unmounted properly, running fsck
[ ok ]
root | * Remounting filesystems ...fsck_atlog | [ ok ]
[ ok ]
localmount | * Mounting local filesystems ... [ ok ]
overlayfs | * Preparing overlayfs over / ... [ ok ]
* WARNING: clock skew detected!
udev-trigger | * Generating a rule to create a /dev/root symlink ...hostname | * Setting hostname ...sysctl | * Configuring kernel parameters ... [ ok ]
[ ok ]
udev-trigger | * Populating /dev with existing devices through uevents ... [ ok ]
[ ok ]
bootmisc | * Migrating /var/lock to /run/lock ... [ ok ]
bootmisc | * Creating user login records ... [ ok ]
bootmisc | * Wiping /var/tmp directory ... [ ok ]
micron-emmc-reten | * Starting micron-emmc-reten
syslog | * Starting busybox syslog ...dbus | * /run/dbus: creating directory
dbus | * /run/dbus: correcting owner
dbus | * Starting System Message Bus ... [ ok ]
[ ok ]
klogd | * Starting busybox klogd ... [ ok ]
networkmanager | * Starting networkmanager ... [ ok ]
dnsmasq | * /var/lib/misc/dnsmasq.leases: creating file
dnsmasq | * /var/lib/misc/dnsmasq.leases: correcting owner
dnsmasq | * Starting dnsmasq ... [ ok ]
* WARNING: clock skew detected!
reset_bootcount | * Resetting bootcount in bootloader env ...buttond | * Starting button watching daemon ...Environment OK, copy 0
reset_bootcount | [ ok ]
[ ok ]
podman-atmark | * Starting configured podman containers ...zramswap | * Creating zram swap device ...avahi-daemon | * Starting avahi-daemon ... [ ok ]
swupdate-hawkbit | * Starting swupdate hawkbit daemon ...chronyd | * Starting chronyd ... [ ok ]
[ ok ]
[ ok ]
abos-web | * Starting abos-web ... [ ok ]
[ ok ]
local | * Starting local ... [ ok ]
Welcome to Alpine Linux 3.18
Kernel 5.10.209-0-at on an armv7l (/dev/ttymxc0)
armadillo login: root
Password:
Welcome to Alpine!
The Alpine Wiki contains a large amount of how-to guides and general
information about administrating Alpine systems.
See .
Please note this system is READ-ONLY with a read-write overlayfs,
after updating password make sure to save new password with
# persist_file /etc/shadow
You can change this message by editing /etc/motd.
Last update on Wed Mar 6 13:48:35 JST 2024, updated:
extra_os.hawkbit: unset -> 1
extra_os.initial_setup: unset -> 4
armadillo:~# * WARNING: clock skew detected!
local | * Stopping local ...zramswap | * Deactivating zram swap device ...swupdate-hawkbit | * Stopping swupdate hawkbit daemon ...podman-atmark | * Stopping all podman containers ... [ ok ]
[ ok ]
* start-stop-daemon: no matching processes found
avahi-daemon | * Stopping avahi-daemon ...swupdate-hawkbit | [ ok ]
buttond | * Stopping button watching daemon ...dnsmasq | * Stopping dnsmasq ... [ ok ]
chronyd | * Stopping chronyd ...abos-web | * Stopping abos-web ... [ ok ]
[ ok ]
[ ok ]
[ ok ]
klogd | * Stopping busybox klogd ... [ ok ]
networkmanager | * Stopping networkmanager ...syslog | * Stopping busybox syslog ... [ ok ]
udev | * Stopping udev ... [ ok ]
[ ok ]
dbus | * Stopping System Message Bus ...nm-dispatcher: Caught signal 15, shutting down...
[ ok ]
[ ok ]
localmount | * Unmounting loop devices
localmount | * Unmounting filesystems
localmount | * Unmounting /var/lib/containers/storage ... [ ok ]
localmount | * Unmounting /var/tmp ... [ ok ]
localmount | * Unmounting /var/app/volumes ... [ ok ]
localmount | * Unmounting /var/app/rollback/volumes ... [ ok ]
localmount | * Unmounting /var/lib/containers/storage_readonly ... [ ok ]
localmount | * Unmounting /tmp ... [ ok ]
localmount | * Unmounting /var/log ... [ ok ]
localmount | * Unmounting /var/at-log ... [ ok ]
killprocs | * Terminating remaining processes ... [ ok ]
killprocs | * Killing remaining processes ... [ ok ]
mount-ro | * Remounting remaining filesystems read-only ... * Remounting / read only ... [ ok ]
mount-ro | [ ok ]
indicator_signals | * Signaling external devices we are shutting down ... [ ok ]
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
[ 176.558706] imx2-wdt 20bc000.watchdog: Device shutdown: Expect reboot!
[ 176.565743] reboot: Restarting system
U-Boot 2020.04-at20 (Oct 24 2023 - 04:16:30 +0000)
CPU: i.MX6ULL rev1.1 at 396 MHz
Model: Atmark Techno Armadillo-600 Series
DRAM: 512 MiB
setup_rtc_disarm_alarm: Can't find bus
WDT: Started with servicing (10s timeout)
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In: mxc_serial
Out: mxc_serial
Err: mxc_serial
switch to partitions #0, OK
mmc0(part 0) is current device
flash target is MMC:0
Net:
Warning: ethernet@2188000 using MAC address from ROM
eth0: ethernet@2188000
Fastboot: Normal
Saving Environment to MMC... Writing to MMC(0)... OK
Normal Boot
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
6386200 bytes read in 150 ms (40.6 MiB/s)
Booting from mmc ...
38353 bytes read in 7 ms (5.2 MiB/s)
Loading fdt boot/armadillo-640.dtb
45 bytes read in 4 ms (10.7 KiB/s)
4413 bytes read in 5 ms (861.3 KiB/s)
Applying fdt overlay: armadillo-640-lcd70ext-l00.dtbo
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-5.10.209-0-at
Created: 2024-01-29 0:48:20 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 6386136 Bytes = 6.1 MiB
Load Address: 82000000
Entry Point: 82000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 83500000
Booting using the fdt blob at 0x83500000
Loading Kernel Image
Loading Device Tree to 9ef1c000, end 9ef48fff ... OK
Starting kernel ...
OpenRC 0.48 is starting up Linux 5.10.209-0-at (armv7l)
* Mounting /proc ... [ ok ]
* Mounting /run ... [ ok ]
* /run/openrc: creating directory
* /run/lock: creating directory
* /run/lock: correcting owner
* Caching service dependencies ... [ ok ]
* Mounting /sys ... * Remounting devtmpfs on /dev ... [ ok ]
[ ok ]
* Mounting security filesystem ... [ ok ]
* Mounting config filesystem ... [ ok ]
* Mounting /dev/mqueue ... [ ok ]
* Mounting /dev/pts ... [ ok ]
* Mounting /dev/shm ... [ ok ]
udev | * Starting udev ... [ ok ]
fsck_atlog | * Checking log filesystems ...fsck | * Checking local filesystems ... [ ok ]
[ ok ]
root | * Remounting filesystems ... [ ok ]
localmount | * Mounting local filesystems ... [ ok ]
overlayfs | * Preparing overlayfs over / ... [ ok ]
udev-trigger | * Generating a rule to create a /dev/root symlink ...sysctl | * Configuring kernel parameters ...hostname | * Setting hostname ... [ ok ]
[ ok ]
udev-trigger | * Populating /dev with existing devices through uevents ... [ ok ]
[ ok ]
bootmisc | * Migrating /var/lock to /run/lock ... [ ok ]
bootmisc | * Creating user login records ... [ ok ]
bootmisc | * Wiping /var/tmp directory ... [ ok ]
micron-emmc-reten | * Starting micron-emmc-reten
dbus | * /run/dbus: creating directory
syslog | * Starting busybox syslog ...dbus | * /run/dbus: correcting owner
dbus | * Starting System Message Bus ... [ ok ]
[ ok ]
klogd | * Starting busybox klogd ... [ ok ]
networkmanager | * Starting networkmanager ... [ ok ]
dnsmasq | * /var/lib/misc/dnsmasq.leases: creating file
dnsmasq | * /var/lib/misc/dnsmasq.leases: correcting owner
dnsmasq | * Starting dnsmasq ... [ ok ]
reset_bootcount | * Resetting bootcount in bootloader env ...buttond | * Starting button watching daemon ... [ ok ]
Environment OK, copy 0
reset_bootcount | [ ok ]
podman-atmark | * Starting configured podman containers ...zramswap | * Creating zram swap device ...avahi-daemon | * Starting avahi-daemon ... [ ok ]
swupdate-hawkbit | * Starting swupdate hawkbit daemon ...chronyd | * Starting chronyd ... [ ok ]
Starting 'sample_container'
Last update on Wed Mar 6 15:38:11 JST 2024, updated:
swupdate-hawkbit | extra_os.sample_container_update: unset -> 1.0.1
swupdate-hawkbit | sample_container_update: unset -> 1.0.1
abos-web | * Starting abos-web ... [ ok ]
swupdate-hawkbit | [ ok ]
podman-atmark |Error: docker.io/debian:bullseye: image not known
podman-atmark |error: Could not start sample_container
podman-atmark | * Could not start all containers
podman-atmark | [ !! ]
podman-atmark | * ERROR: podman-atmark failed to start
[ ok ]
local | * Starting local ... [ ok ]
Welcome to Alpine Linux 3.18
Kernel 5.10.209-0-at on an armv7l (/dev/ttymxc0)
armadillo login: root
Password:
Welcome to Alpine!
The Alpine Wiki contains a large amount of how-to guides and general
information about administrating Alpine systems.
See .
Please note this system is READ-ONLY with a read-write overlayfs,
after updating password make sure to save new password with
# persist_file /etc/shadow
You can change this message by editing /etc/motd.
Last update on Wed Mar 6 15:38:11 JST 2024, updated:
extra_os.sample_container_update: unset -> 1.0.1
sample_container_update: unset -> 1.0.1