[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.10.226-0-at (builder@9946fe113c9a) (aarch64-alpine-linux-musl-gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT Fri Sep 20 04:53:40 UTC 2024 [ 0.000000] Machine model: Atmark-Techno Armadillo-IoT Gateway G4 Board [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 1024 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000055ffffff] [ 0.000000] node 0: [mem 0x0000000058000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] On node 0 totalpages: 516096 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 516096 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 22 pages/cpu s49176 r8192 d32744 u90112 [ 0.000000] pcpu-alloc: s49176 r8192 d32744 u90112 alloc=22*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507904 [ 0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk2p1 rootwait ro quiet nokaslr [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 952780K/2064384K available (14398K kernel code, 1316K rwdata, 4124K rodata, 1984K init, 427K bss, 63028K reserved, 1048576K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 160 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns [ 0.000004] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns [ 0.000476] Console: colour dummy device 80x25 [ 0.000502] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) [ 0.000512] pid_max: default: 32768 minimum: 301 [ 0.000874] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000884] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002464] rcu: Hierarchical SRCU implementation. [ 0.003987] smp: Bringing up secondary CPUs ... [ 0.004423] Detected VIPT I-cache on CPU1 [ 0.004447] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000 [ 0.004480] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.004922] Detected VIPT I-cache on CPU2 [ 0.004939] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000 [ 0.004958] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005388] Detected VIPT I-cache on CPU3 [ 0.005403] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000 [ 0.005421] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005476] smp: Brought up 1 node, 4 CPUs [ 0.005484] SMP: Total of 4 processors activated. [ 0.005488] CPU features: detected: 32-bit EL0 Support [ 0.005494] CPU features: detected: CRC32 instructions [ 0.005742] CPU: All CPU(s) started at EL2 [ 0.005757] alternatives: patching kernel code [ 0.006530] devtmpfs: initialized [ 0.017460] KASLR disabled on command line [ 0.017631] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.017643] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.041061] pinctrl core: initialized pinctrl subsystem [ 0.042061] NET: Registered protocol family 16 [ 0.048906] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.049832] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.050743] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.051245] thermal_sys: Registered thermal governor 'step_wise' [ 0.051587] cpuidle: using governor ladder [ 0.051604] cpuidle: using governor menu [ 0.051846] ASID allocator initialised with 65536 entries [ 0.053072] Serial: AMBA PL011 UART driver [ 0.053126] imx mu driver is registered. [ 0.053155] imx rpmsg driver is registered. [ 0.090534] imx8mp-pinctrl 30330000.pinctrl: no fsl,pins and pins property in node /soc@0/bus@30000000/pinctrl@30330000/expansion_interfacehoggrp [ 0.090549] imx8mp-pinctrl 30330000.pinctrl: no fsl,pins and pins property in node /soc@0/bus@30000000/pinctrl@30330000/customizegrp [ 0.090676] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver [ 0.105026] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.105036] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.105041] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.105047] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.106910] cryptd: max_cpu_qlen set to 1000 [ 0.109490] raid6: skip pq benchmark and using algorithm neonx8 [ 0.109498] raid6: using neon recovery algorithm [ 0.111623] iommu: Default domain type: Translated [ 0.111778] vgaarb: loaded [ 0.112038] SCSI subsystem initialized [ 0.112198] libata version 3.00 loaded. [ 0.112366] usbcore: registered new interface driver usbfs [ 0.112395] usbcore: registered new interface driver hub [ 0.112416] usbcore: registered new device driver usb [ 0.113853] mc: Linux media interface: v0.10 [ 0.113876] videodev: Linux video capture interface: v2.00 [ 0.113926] pps_core: LinuxPPS API ver. 1 registered [ 0.113929] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.113941] PTP clock support registered [ 0.113973] EDAC MC: Ver: 3.0.0 [ 0.115052] Advanced Linux Sound Architecture Driver Initialized. [ 0.115457] Bluetooth: Core ver 2.22 [ 0.115484] NET: Registered protocol family 31 [ 0.115489] Bluetooth: HCI device and connection manager initialized [ 0.115495] Bluetooth: HCI socket layer initialized [ 0.115500] Bluetooth: L2CAP socket layer initialized [ 0.115506] Bluetooth: SCO socket layer initialized [ 0.116371] clocksource: Switched to clocksource arch_sys_counter [ 0.123306] NET: Registered protocol family 2 [ 0.123435] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.124601] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.124634] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.124739] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.124955] TCP: Hash tables configured (established 16384 bind 16384) [ 0.125036] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.125078] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.125260] NET: Registered protocol family 1 [ 0.125279] NET: Registered protocol family 44 [ 0.125288] PCI: CLS 0 bytes, default 64 [ 0.130447] Initialise system trusted keyrings [ 0.130542] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.136465] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.173110] NET: Registered protocol family 38 [ 0.173118] xor: measuring software checksum speed [ 0.177294] 8regs : 2366 MB/sec [ 0.180817] 32regs : 2802 MB/sec [ 0.184956] arm64_neon : 2382 MB/sec [ 0.184960] xor: using function: 32regs (2802 MB/sec) [ 0.184968] Key type asymmetric registered [ 0.184974] Asymmetric key parser 'x509' registered [ 0.185017] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.200505] imx-sdma 30bd0000.dma-controller: firmware found. [ 0.200663] imx-sdma 30bd0000.dma-controller: loaded firmware 4.6 [ 0.202402] Bus freq driver module loaded [ 0.207258] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.209632] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 30, base_baud = 5000000) is a IMX [ 0.210292] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 31, base_baud = 1500000) is a IMX [ 0.210369] printk: console [ttymxc1] enabled [ 0.222472] zram: Added device: zram0 [ 0.223551] imx ahci driver is registered. [ 0.226551] tun: Universal TUN/TAP device driver, 1.6 [ 0.228811] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found [ 0.228896] imx-dwmac 30bf0000.ethernet: no reset control found [ 0.229077] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51 [ 0.229084] imx-dwmac 30bf0000.ethernet: DWMAC4/5 [ 0.229093] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported [ 0.229098] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported [ 0.229103] imx-dwmac 30bf0000.ethernet: TX Checksum insertion supported [ 0.229107] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported [ 0.229156] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.229175] imx-dwmac 30bf0000.ethernet: Enabled Flow TC (entries=8) [ 0.229184] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256) [ 0.229190] imx-dwmac 30bf0000.ethernet: Using 34 bits DMA width [ 0.230312] PPP generic driver version 2.4.2 [ 0.230431] PPP Deflate Compression module registered [ 0.230651] VFIO - User Level meta-driver version: 0.3 [ 0.236536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.236545] ehci-pci: EHCI PCI platform driver [ 0.236574] ehci-platform: EHCI generic platform driver [ 0.236752] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.236755] ohci-pci: OHCI PCI platform driver [ 0.236782] ohci-platform: OHCI generic platform driver [ 0.237411] usbcore: registered new interface driver cdc_acm [ 0.237415] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.237546] usbcore: registered new interface driver uas [ 0.237598] usbcore: registered new interface driver usb-storage [ 0.237652] usbcore: registered new interface driver usbserial_generic [ 0.237679] usbserial: USB Serial support registered for generic [ 0.237706] usbcore: registered new interface driver option [ 0.237722] usbserial: USB Serial support registered for GSM modem (1-port) [ 0.237746] usbcore: registered new interface driver usb_serial_simple [ 0.237762] usbserial: USB Serial support registered for carelink [ 0.237778] usbserial: USB Serial support registered for flashloader [ 0.237805] usbserial: USB Serial support registered for funsoft [ 0.237820] usbserial: USB Serial support registered for google [ 0.237835] usbserial: USB Serial support registered for hp4x [ 0.237850] usbserial: USB Serial support registered for kaufmann [ 0.237866] usbserial: USB Serial support registered for libtransistor [ 0.237881] usbserial: USB Serial support registered for moto_modem [ 0.237897] usbserial: USB Serial support registered for motorola_tetra [ 0.237911] usbserial: USB Serial support registered for nokia [ 0.237926] usbserial: USB Serial support registered for novatel_gps [ 0.237942] usbserial: USB Serial support registered for siemens_mpi [ 0.237968] usbserial: USB Serial support registered for suunto [ 0.237995] usbserial: USB Serial support registered for vivopay [ 0.238011] usbserial: USB Serial support registered for zio [ 0.238040] usbcore: registered new interface driver usb_ehset_test [ 0.239717] udc-core: couldn't find an available UDC - added [g_multi] to list of pending drivers [ 0.241086] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc1 [ 0.241293] i2c /dev entries driver [ 0.242368] usbcore: registered new interface driver uvcvideo [ 0.242373] USB Video Class driver (1.1.1) [ 0.245039] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 0.245112] Bluetooth: HCI UART driver ver 2.3 [ 0.245144] Bluetooth: HCI UART protocol H4 registered [ 0.245148] Bluetooth: HCI UART protocol BCSP registered [ 0.245166] Bluetooth: HCI UART protocol LL registered [ 0.245169] Bluetooth: HCI UART protocol ATH3K registered [ 0.245186] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 0.245265] Bluetooth: HCI UART protocol Intel registered [ 0.245339] Bluetooth: HCI UART protocol Broadcom registered [ 0.245356] Bluetooth: HCI UART protocol QCA registered [ 0.245359] Bluetooth: HCI UART protocol AG6XX registered [ 0.245376] Bluetooth: HCI UART protocol Marvell registered [ 0.245425] usbcore: registered new interface driver bcm203x [ 0.245457] usbcore: registered new interface driver bpa10x [ 0.245485] usbcore: registered new interface driver bfusb [ 0.245524] usbcore: registered new interface driver btusb [ 0.245571] usbcore: registered new interface driver ath3k [ 0.245849] EDAC MC: ECC not enabled [ 0.246932] sdhci: Secure Digital Host Controller Interface driver [ 0.246935] sdhci: Copyright(c) Pierre Ossman [ 0.247076] Synopsys Designware Multimedia Card Interface Driver [ 0.247729] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.249288] mmc2: CQHCI version 5.10 [ 0.250417] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.251199] caam-snvs 30370000.caam-snvs: violation handlers armed - init state [ 0.251449] hid: raw HID events driver (C) Jiri Kosina [ 0.251679] usbcore: registered new interface driver usbhid [ 0.251683] usbhid: USB HID core driver [ 0.254797] optee: probing for conduit method. [ 0.254815] optee: revision 3.15 (accb888e) [ 0.255047] optee: dynamic shared memory is enabled [ 0.255391] optee: initialized driver [ 0.258360] Galcore version 6.4.3.p2.336687 [ 0.282086] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA [ 0.377009] [drm] Initialized vivante 1.0.0 20170808 for 40000000.mix_gpu_ml on minor 0 [ 0.378221] hantrodec 0 : module inserted. Major = 237 [ 0.378887] hantrodec 1 : module inserted. Major = 237 [ 0.380060] hantroenc: HW at base <0000000038320000> with ID <0x80006200> [ 0.380200] hx280enc: module inserted. Major <236> [ 0.381170] usbcore: registered new interface driver snd-usb-audio [ 0.384839] mmc2: Command Queue Engine enabled [ 0.384858] mmc2: new HS400 Enhanced strobe MMC card at address 0001 [ 0.385923] mmcblk2: mmc2:0001 G1M15L 9.84 GiB [ 0.386070] mmcblk2boot0: mmc2:0001 G1M15L partition 1 31.5 MiB [ 0.386200] mmcblk2boot1: mmc2:0001 G1M15L partition 2 31.5 MiB [ 0.386334] mmcblk2gp0: mmc2:0001 G1M15L partition 4 8.00 MiB [ 0.386469] mmcblk2gp1: mmc2:0001 G1M15L partition 5 8.00 MiB [ 0.386621] mmcblk2gp2: mmc2:0001 G1M15L partition 6 8.00 MiB [ 0.386773] mmcblk2gp3: mmc2:0001 G1M15L partition 7 8.00 MiB [ 0.386996] mmcblk2rpmb: mmc2:0001 G1M15L partition 3 4.00 MiB, chardev (239:0) [ 0.387825] NET: Registered protocol family 10 [ 0.391109] Segment Routing with IPv6 [ 0.391264] NET: Registered protocol family 17 [ 0.391310] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.391383] Bluetooth: RFCOMM TTY layer initialized [ 0.391390] Bluetooth: RFCOMM socket layer initialized [ 0.391394] Bluetooth: RFCOMM ver 1.11 [ 0.391401] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.391404] Bluetooth: BNEP filters: protocol multicast [ 0.391413] Bluetooth: BNEP socket layer initialized [ 0.391418] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.391423] Bluetooth: HIDP socket layer initialized [ 0.391467] mmcblk2: p1 p2 p3 p4 p5 [ 0.391501] lib80211: common routines for IEEE802.11 drivers [ 0.391505] lib80211_crypt: registered algorithm 'NULL' [ 0.391510] lib80211_crypt: registered algorithm 'WEP' [ 0.391513] lib80211_crypt: registered algorithm 'CCMP' [ 0.391518] lib80211_crypt: registered algorithm 'TKIP' [ 0.391527] tsn generic netlink module v1 init... [ 0.391623] Key type dns_resolver registered [ 0.391628] mpls_gso: MPLS GSO support [ 0.391916] registered taskstats version 1 [ 0.391925] Loading compiled-in X.509 certificates [ 0.395083] Loaded X.509 cert 'Build time autogenerated kernel key: 6817f727363c7ab4793bbb0037da5db9ddd8a9e4' [ 0.396172] Btrfs loaded, crc32c=crc32c-generic [ 0.398838] mmcblk2gp1: [ 0.405470] M2_3P3V: supplied by VEXT_3P3V [ 0.416127] nxp-pca9450 0-0025: pca9450bc probed. [ 0.416270] i2c i2c-0: IMX I2C adapter registered [ 0.425711] rtc-rv8803 1-0032: registered as rtc0 [ 0.427515] rtc-rv8803 1-0032: setting system clock to 2024-11-18T01:38:10 UTC (1731893890) [ 0.428265] usb251xb 1-002c: supply vdd not found, using dummy regulator [ 0.501568] usb251xb 1-002c: Hub configuration was successful. [ 0.501573] usb251xb 1-002c: Hub probed successfully [ 0.501713] i2c i2c-1: IMX I2C adapter registered [ 0.507383] i2c i2c-2: IMX I2C adapter registered [ 0.508312] i2c i2c-3: IMX I2C adapter registered [ 0.509736] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator [ 0.510058] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator [ 0.513425] imx6q-pcie 33800000.pcie: supply epdev_on not found, using dummy regulator [ 0.515808] imx6q-pcie 33800000.pcie: PLL REF_CLK is used!. [ 0.516459] imx6q-pcie 33800000.pcie: PCIe PHY PLL clock is locked. [ 0.516485] phy phy-32f00000.pcie-phy.4: Tuning i.MX PCIe PHY for Armadillo G4. [ 0.516522] imx6q-pcie 33800000.pcie: PCIe PLL locked after 0 us. [ 0.521765] SoC: i.MX8MP revision 1.1 [ 0.522005] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 7 mkt segment 2 supported-hw 0x80 0x4 [ 0.526198] imx-sdma 30e10000.dma-controller: firmware found. [ 0.652719] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges: [ 0.652735] imx6q-pcie 33800000.pcie: No bus range found for /soc@0/pcie@33800000, using [bus 00-ff] [ 0.652762] imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000 [ 0.652805] imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000 [ 0.809553] pps pps0: new PPS source ptp0 [ 0.815978] mdio_bus 30be0000.ethernet-1: MDIO device at address 3 is missing. [ 0.823914] fec 30be0000.ethernet eth0: registered PHC device 0 [ 0.824894] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found [ 0.824989] imx-dwmac 30bf0000.ethernet: no reset control found [ 0.825552] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51 [ 0.825559] imx-dwmac 30bf0000.ethernet: DWMAC4/5 [ 0.825566] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported [ 0.825570] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported [ 0.825574] imx-dwmac 30bf0000.ethernet: TX Checksum insertion supported [ 0.825577] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported [ 0.825581] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.825585] imx-dwmac 30bf0000.ethernet: Enabled Flow TC (entries=8) [ 0.825593] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256) [ 0.825597] imx-dwmac 30bf0000.ethernet: Using 34 bits DMA width [ 1.012827] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.012846] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.013188] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000002021810010 [ 1.013225] xhci-hcd xhci-hcd.1.auto: irq 65, io mem 0x38100000 [ 1.013233] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.013243] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.013252] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.013756] hub 1-0:1.0: USB hub found [ 1.013780] hub 1-0:1.0: 1 port detected [ 1.014082] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.014474] hub 2-0:1.0: USB hub found [ 1.014498] hub 2-0:1.0: 1 port detected [ 1.015707] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.015723] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 1.016080] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000002021810010 [ 1.016133] xhci-hcd xhci-hcd.2.auto: irq 66, io mem 0x38200000 [ 1.016145] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.016155] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 1.016165] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 1.016685] hub 3-0:1.0: USB hub found [ 1.016707] hub 3-0:1.0: 1 port detected [ 1.016992] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.017396] hub 4-0:1.0: USB hub found [ 1.017417] hub 4-0:1.0: 1 port detected [ 1.019647] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO [ 1.019715] mmc1: CQHCI version 5.10 [ 1.020647] caam 30900000.crypto: device ID = 0x0a16040100000100 (Era 9) [ 1.020657] caam 30900000.crypto: job rings = 1, qi = 0 [ 1.025072] caam algorithms registered in /proc/crypto [ 1.025849] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto [ 1.025856] caam 30900000.crypto: registering rng-caam [ 1.026874] Device caam-keygen registered [ 1.030603] imx-drm display-subsystem: bound imx-lcdifv3-crtc.0 (ops 0xffff800010ecec48) [ 1.030648] imx-drm display-subsystem: bound imx-lcdifv3-crtc.1 (ops 0xffff800010ecec48) [ 1.030832] imx-drm display-subsystem: bound 32c00000.bus:ldb@32ec005c (ops 0xffff800010ebbc88) [ 1.031065] dwhdmi-imx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (samsung_dw_hdmi_phy2) [ 1.031395] dwhdmi-imx 32fd8000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.032104] imx-drm display-subsystem: bound 32fd8000.hdmi (ops 0xffff800010ebc370) [ 1.032283] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 1.051613] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA [ 1.052217] Console: switching to colour frame buffer device 128x48 [ 1.063022] random: crng init done [ 1.072570] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device [ 1.075461] input: audio-hdmi HDMI Jack as /devices/platform/sound-hdmi/sound/card0/input0 [ 1.076422] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.076981] clk: Disabling unused clocks [ 1.078622] ALSA device list: [ 1.078626] #0: audio-hdmi [ 1.272703] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 1.465225] hub 3-1:1.0: USB hub found [ 1.465575] hub 3-1:1.0: 2 ports detected [ 1.645312] imx6q-pcie 33800000.pcie: Phy link never came up [ 1.649935] imx6q-pcie 33800000.pcie: failed to initialize host [ 1.655876] imx6q-pcie 33800000.pcie: unable to add pcie port. [ 1.668438] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.668488] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 1.670029] devtmpfs: mounted [ 1.670613] Freeing unused kernel memory: 1984K [ 1.693016] Run /sbin/init as init process [ 1.693020] with arguments: [ 1.693022] /sbin/init [ 1.693025] nokaslr [ 1.693027] with environment: [ 1.693030] HOME=/ [ 1.693033] TERM=linux [ 2.429063] udevd[704]: starting version 3.2.14 [ 2.473487] udevd[704]: starting eudev-3.2.14 [ 2.515415] EXT4-fs (mmcblk2p1): re-mounted. Opts: (null) [ 2.547675] EXT4-fs (mmcblk2p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.594269] BTRFS: device label app devid 1 transid 51 /dev/mmcblk2p5 scanned by busybox (856) [ 2.595720] BTRFS info (device mmcblk2p5): using crc32c (crc32c-generic) checksum algorithm [ 2.595739] BTRFS info (device mmcblk2p5): flagging fs with big metadata feature [ 2.595750] BTRFS info (device mmcblk2p5): use zstd compression, level 3 [ 2.595758] BTRFS info (device mmcblk2p5): turning on async discard [ 2.595767] BTRFS info (device mmcblk2p5): using free space tree [ 2.595772] BTRFS info (device mmcblk2p5): has skinny extents [ 2.601166] BTRFS info (device mmcblk2p5): enabling ssd optimizations [ 3.567321] fec 30be0000.ethernet eth0: Unable to connect to phy [ 3.678862] imx-dwmac 30bf0000.ethernet eth1: PHY [stmmac-1:03] driver [Microchip KSZ9131 Gigabit PHY] (irq=POLL) [ 3.716442] imx-dwmac 30bf0000.ethernet eth1: No Safety Features support found [ 3.716469] imx-dwmac 30bf0000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 3.716981] imx-dwmac 30bf0000.ethernet eth1: registered PTP clock [ 3.717308] imx-dwmac 30bf0000.ethernet eth1: configuring for phy/rgmii-id link mode [ 3.728681] zram0: detected capacity change from 0 to 1000001536 [ 3.757331] Adding 976560k swap on /dev/zram0. Priority:100 extents:1 across:976560k SS [ 6.787087] imx-dwmac 30bf0000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 6.787094] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 64.917301] fec 30be0000.ethernet eth0: Unable to connect to phy [ 64.952727] fec 30be0000.ethernet eth0: Unable to connect to phy [ 64.986446] fec 30be0000.ethernet eth0: Unable to connect to phy [ 65.019781] fec 30be0000.ethernet eth0: Unable to connect to phy