[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.10.226-0-at (builder@9946fe113c9a) (aarch64-alpine-linux-musl-gcc (Alpine 13.2.1_git20240309) 13.2.1 20240309, GNU ld (GNU Binutils) 2.42) #1-Alpine SMP PREEMPT Fri Sep 20 04:53:40 UTC 2024 [ 0.000000] Machine model: Atmark-Techno Armadillo-IoT Gateway G4 Board [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000080000000, size 1024 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000055ffffff] [ 0.000000] node 0: [mem 0x0000000058000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] On node 0 totalpages: 516096 [ 0.000000] DMA zone: 8192 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 516096 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 22 pages/cpu s49176 r8192 d32744 u90112 [ 0.000000] pcpu-alloc: s49176 r8192 d32744 u90112 alloc=22*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 507904 [ 0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk2p1 rootwait ro quiet nokaslr [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 952780K/2064384K available (14398K kernel code, 1316K rwdata, 4124K rodata, 1984K init, 427K bss, 63028K reserved, 1048576K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 160 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000038880000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns [ 0.000003] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns [ 0.000480] Console: colour dummy device 80x25 [ 0.000506] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) [ 0.000516] pid_max: default: 32768 minimum: 301 [ 0.000873] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.000885] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.002466] rcu: Hierarchical SRCU implementation. [ 0.003984] smp: Bringing up secondary CPUs ... [ 0.004414] Detected VIPT I-cache on CPU1 [ 0.004438] GICv3: CPU1: found redistributor 1 region 0:0x00000000388a0000 [ 0.004470] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.004908] Detected VIPT I-cache on CPU2 [ 0.004923] GICv3: CPU2: found redistributor 2 region 0:0x00000000388c0000 [ 0.004941] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005371] Detected VIPT I-cache on CPU3 [ 0.005387] GICv3: CPU3: found redistributor 3 region 0:0x00000000388e0000 [ 0.005403] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005464] smp: Brought up 1 node, 4 CPUs [ 0.005471] SMP: Total of 4 processors activated. [ 0.005475] CPU features: detected: 32-bit EL0 Support [ 0.005481] CPU features: detected: CRC32 instructions [ 0.005728] CPU: All CPU(s) started at EL2 [ 0.005743] alternatives: patching kernel code [ 0.006514] devtmpfs: initialized [ 0.017390] KASLR disabled on command line [ 0.017559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.017571] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.040830] pinctrl core: initialized pinctrl subsystem [ 0.041826] NET: Registered protocol family 16 [ 0.048631] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 0.049547] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.050479] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.050982] thermal_sys: Registered thermal governor 'step_wise' [ 0.051319] cpuidle: using governor ladder [ 0.051335] cpuidle: using governor menu [ 0.051574] ASID allocator initialised with 65536 entries [ 0.052801] Serial: AMBA PL011 UART driver [ 0.052857] imx mu driver is registered. [ 0.052888] imx rpmsg driver is registered. [ 0.090166] imx8mp-pinctrl 30330000.pinctrl: no fsl,pins and pins property in node /soc@0/bus@30000000/pinctrl@30330000/expansion_interfacehoggrp [ 0.090183] imx8mp-pinctrl 30330000.pinctrl: no fsl,pins and pins property in node /soc@0/bus@30000000/pinctrl@30330000/customizegrp [ 0.090310] imx8mp-pinctrl 30330000.pinctrl: initialized IMX pinctrl driver [ 0.104615] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.104624] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.104630] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.104637] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.106525] cryptd: max_cpu_qlen set to 1000 [ 0.109122] raid6: skip pq benchmark and using algorithm neonx8 [ 0.109130] raid6: using neon recovery algorithm [ 0.111257] iommu: Default domain type: Translated [ 0.111411] vgaarb: loaded [ 0.111669] SCSI subsystem initialized [ 0.111826] libata version 3.00 loaded. [ 0.111994] usbcore: registered new interface driver usbfs [ 0.112024] usbcore: registered new interface driver hub [ 0.112048] usbcore: registered new device driver usb [ 0.113455] mc: Linux media interface: v0.10 [ 0.113478] videodev: Linux video capture interface: v2.00 [ 0.113528] pps_core: LinuxPPS API ver. 1 registered [ 0.113531] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.113542] PTP clock support registered [ 0.113572] EDAC MC: Ver: 3.0.0 [ 0.114646] Advanced Linux Sound Architecture Driver Initialized. [ 0.115046] Bluetooth: Core ver 2.22 [ 0.115074] NET: Registered protocol family 31 [ 0.115077] Bluetooth: HCI device and connection manager initialized [ 0.115084] Bluetooth: HCI socket layer initialized [ 0.115089] Bluetooth: L2CAP socket layer initialized [ 0.115095] Bluetooth: SCO socket layer initialized [ 0.115964] clocksource: Switched to clocksource arch_sys_counter [ 0.122777] NET: Registered protocol family 2 [ 0.122904] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.124059] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear) [ 0.124090] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.124195] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.124405] TCP: Hash tables configured (established 16384 bind 16384) [ 0.124489] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.124530] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.124711] NET: Registered protocol family 1 [ 0.124730] NET: Registered protocol family 44 [ 0.124739] PCI: CLS 0 bytes, default 64 [ 0.130030] Initialise system trusted keyrings [ 0.130156] workingset: timestamp_bits=46 max_order=19 bucket_order=0 [ 0.136051] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.172237] NET: Registered protocol family 38 [ 0.172247] xor: measuring software checksum speed [ 0.176422] 8regs : 2365 MB/sec [ 0.179935] 32regs : 2802 MB/sec [ 0.184084] arm64_neon : 2382 MB/sec [ 0.184088] xor: using function: 32regs (2802 MB/sec) [ 0.184094] Key type asymmetric registered [ 0.184098] Asymmetric key parser 'x509' registered [ 0.184141] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 0.199596] imx-sdma 30bd0000.dma-controller: firmware found. [ 0.199761] imx-sdma 30bd0000.dma-controller: loaded firmware 4.6 [ 0.201520] Bus freq driver module loaded [ 0.206308] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.208664] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 30, base_baud = 5000000) is a IMX [ 0.209367] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 31, base_baud = 1500000) is a IMX [ 0.209445] printk: console [ttymxc1] enabled [ 0.221651] zram: Added device: zram0 [ 0.222740] imx ahci driver is registered. [ 0.225724] tun: Universal TUN/TAP device driver, 1.6 [ 0.228012] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found [ 0.228095] imx-dwmac 30bf0000.ethernet: no reset control found [ 0.228251] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51 [ 0.228258] imx-dwmac 30bf0000.ethernet: DWMAC4/5 [ 0.228266] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported [ 0.228271] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported [ 0.228275] imx-dwmac 30bf0000.ethernet: TX Checksum insertion supported [ 0.228279] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported [ 0.228330] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.228336] imx-dwmac 30bf0000.ethernet: Enabled Flow TC (entries=8) [ 0.228345] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256) [ 0.228351] imx-dwmac 30bf0000.ethernet: Using 34 bits DMA width [ 0.229458] PPP generic driver version 2.4.2 [ 0.229573] PPP Deflate Compression module registered [ 0.229772] VFIO - User Level meta-driver version: 0.3 [ 0.235707] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.235716] ehci-pci: EHCI PCI platform driver [ 0.235745] ehci-platform: EHCI generic platform driver [ 0.235920] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.235924] ohci-pci: OHCI PCI platform driver [ 0.235995] ohci-platform: OHCI generic platform driver [ 0.236645] usbcore: registered new interface driver cdc_acm [ 0.236649] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 0.236780] usbcore: registered new interface driver uas [ 0.236825] usbcore: registered new interface driver usb-storage [ 0.236902] usbcore: registered new interface driver usbserial_generic [ 0.236918] usbserial: USB Serial support registered for generic [ 0.236944] usbcore: registered new interface driver option [ 0.236958] usbserial: USB Serial support registered for GSM modem (1-port) [ 0.236996] usbcore: registered new interface driver usb_serial_simple [ 0.237023] usbserial: USB Serial support registered for carelink [ 0.237039] usbserial: USB Serial support registered for flashloader [ 0.237055] usbserial: USB Serial support registered for funsoft [ 0.237069] usbserial: USB Serial support registered for google [ 0.237084] usbserial: USB Serial support registered for hp4x [ 0.237099] usbserial: USB Serial support registered for kaufmann [ 0.237114] usbserial: USB Serial support registered for libtransistor [ 0.237128] usbserial: USB Serial support registered for moto_modem [ 0.237143] usbserial: USB Serial support registered for motorola_tetra [ 0.237159] usbserial: USB Serial support registered for nokia [ 0.237174] usbserial: USB Serial support registered for novatel_gps [ 0.237199] usbserial: USB Serial support registered for siemens_mpi [ 0.237215] usbserial: USB Serial support registered for suunto [ 0.237231] usbserial: USB Serial support registered for vivopay [ 0.237247] usbserial: USB Serial support registered for zio [ 0.237286] usbcore: registered new interface driver usb_ehset_test [ 0.238942] udc-core: couldn't find an available UDC - added [g_multi] to list of pending drivers [ 0.240357] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc1 [ 0.240565] i2c /dev entries driver [ 0.241666] usbcore: registered new interface driver uvcvideo [ 0.241670] USB Video Class driver (1.1.1) [ 0.244321] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com [ 0.244410] Bluetooth: HCI UART driver ver 2.3 [ 0.244431] Bluetooth: HCI UART protocol H4 registered [ 0.244435] Bluetooth: HCI UART protocol BCSP registered [ 0.244452] Bluetooth: HCI UART protocol LL registered [ 0.244455] Bluetooth: HCI UART protocol ATH3K registered [ 0.244472] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 0.244540] Bluetooth: HCI UART protocol Intel registered [ 0.244617] Bluetooth: HCI UART protocol Broadcom registered [ 0.244657] Bluetooth: HCI UART protocol QCA registered [ 0.244661] Bluetooth: HCI UART protocol AG6XX registered [ 0.244679] Bluetooth: HCI UART protocol Marvell registered [ 0.244717] usbcore: registered new interface driver bcm203x [ 0.244747] usbcore: registered new interface driver bpa10x [ 0.244776] usbcore: registered new interface driver bfusb [ 0.244816] usbcore: registered new interface driver btusb [ 0.244862] usbcore: registered new interface driver ath3k [ 0.245134] EDAC MC: ECC not enabled [ 0.246244] sdhci: Secure Digital Host Controller Interface driver [ 0.246247] sdhci: Copyright(c) Pierre Ossman [ 0.246371] Synopsys Designware Multimedia Card Interface Driver [ 0.246993] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.248581] mmc2: CQHCI version 5.10 [ 0.249665] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 0.250397] caam-snvs 30370000.caam-snvs: violation handlers armed - init state [ 0.250635] hid: raw HID events driver (C) Jiri Kosina [ 0.250860] usbcore: registered new interface driver usbhid [ 0.250864] usbhid: USB HID core driver [ 0.253935] optee: probing for conduit method. [ 0.253954] optee: revision 3.15 (accb888e) [ 0.254185] optee: dynamic shared memory is enabled [ 0.254531] optee: initialized driver [ 0.257497] Galcore version 6.4.3.p2.336687 [ 0.280984] mmc2: SDHCI controller on 30b60000.mmc [30b60000.mmc] using ADMA [ 0.371336] [drm] Initialized vivante 1.0.0 20170808 for 40000000.mix_gpu_ml on minor 0 [ 0.372575] hantrodec 0 : module inserted. Major = 237 [ 0.373211] hantrodec 1 : module inserted. Major = 237 [ 0.374419] hantroenc: HW at base <0000000038320000> with ID <0x80006200> [ 0.374564] hx280enc: module inserted. Major <236> [ 0.375502] usbcore: registered new interface driver snd-usb-audio [ 0.382041] NET: Registered protocol family 10 [ 0.384875] mmc2: Command Queue Engine enabled [ 0.384895] mmc2: new HS400 Enhanced strobe MMC card at address 0001 [ 0.385313] mmcblk2: mmc2:0001 G1M15L 9.84 GiB [ 0.385462] mmcblk2boot0: mmc2:0001 G1M15L partition 1 31.5 MiB [ 0.385621] mmcblk2boot1: mmc2:0001 G1M15L partition 2 31.5 MiB [ 0.385753] mmcblk2gp0: mmc2:0001 G1M15L partition 4 8.00 MiB [ 0.385908] mmcblk2gp1: mmc2:0001 G1M15L partition 5 8.00 MiB [ 0.386060] mmcblk2gp2: mmc2:0001 G1M15L partition 6 8.00 MiB [ 0.386242] mmcblk2gp3: mmc2:0001 G1M15L partition 7 8.00 MiB [ 0.386407] mmcblk2rpmb: mmc2:0001 G1M15L partition 3 4.00 MiB, chardev (239:0) [ 0.386890] Segment Routing with IPv6 [ 0.387043] NET: Registered protocol family 17 [ 0.387114] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 0.387211] Bluetooth: RFCOMM TTY layer initialized [ 0.387226] Bluetooth: RFCOMM socket layer initialized [ 0.387230] Bluetooth: RFCOMM ver 1.11 [ 0.387234] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 0.387237] Bluetooth: BNEP filters: protocol multicast [ 0.387244] Bluetooth: BNEP socket layer initialized [ 0.387248] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 0.387253] Bluetooth: HIDP socket layer initialized [ 0.387327] lib80211: common routines for IEEE802.11 drivers [ 0.387332] lib80211_crypt: registered algorithm 'NULL' [ 0.387336] lib80211_crypt: registered algorithm 'WEP' [ 0.387340] lib80211_crypt: registered algorithm 'CCMP' [ 0.387345] lib80211_crypt: registered algorithm 'TKIP' [ 0.387354] tsn generic netlink module v1 init... [ 0.387442] Key type dns_resolver registered [ 0.387447] mpls_gso: MPLS GSO support [ 0.387771] registered taskstats version 1 [ 0.387779] Loading compiled-in X.509 certificates [ 0.388190] mmcblk2: p1 p2 p3 p4 p5 [ 0.391011] Loaded X.509 cert 'Build time autogenerated kernel key: 6817f727363c7ab4793bbb0037da5db9ddd8a9e4' [ 0.392076] Btrfs loaded, crc32c=crc32c-generic [ 0.394162] mmcblk2gp1: [ 0.401025] M2_3P3V: supplied by VEXT_3P3V [ 0.411989] nxp-pca9450 0-0025: pca9450bc probed. [ 0.412147] i2c i2c-0: IMX I2C adapter registered [ 0.421637] rtc-rv8803 1-0032: registered as rtc0 [ 0.423446] rtc-rv8803 1-0032: setting system clock to 2024-11-18T01:54:57 UTC (1731894897) [ 0.424212] usb251xb 1-002c: supply vdd not found, using dummy regulator [ 0.628109] usb251xb 1-002c: Hub configuration was successful. [ 0.628115] usb251xb 1-002c: Hub probed successfully [ 0.628251] i2c i2c-1: IMX I2C adapter registered [ 0.637742] i2c i2c-2: IMX I2C adapter registered [ 0.638402] i2c i2c-3: IMX I2C adapter registered [ 0.639763] imx8mq-usb-phy 381f0040.usb-phy: supply vbus not found, using dummy regulator [ 0.640088] imx8mq-usb-phy 382f0040.usb-phy: supply vbus not found, using dummy regulator [ 0.643419] imx6q-pcie 33800000.pcie: supply epdev_on not found, using dummy regulator [ 0.647055] imx6q-pcie 33800000.pcie: PLL REF_CLK is used!. [ 0.647921] imx6q-pcie 33800000.pcie: PCIe PHY PLL clock is locked. [ 0.647948] phy phy-32f00000.pcie-phy.4: Tuning i.MX PCIe PHY for Armadillo G4. [ 0.648002] imx6q-pcie 33800000.pcie: PCIe PLL locked after 0 us. [ 0.651555] SoC: i.MX8MP revision 1.1 [ 0.651773] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 7 mkt segment 2 supported-hw 0x80 0x4 [ 0.655900] imx-sdma 30e10000.dma-controller: firmware found. [ 0.784342] imx6q-pcie 33800000.pcie: host bridge /soc@0/pcie@33800000 ranges: [ 0.784358] imx6q-pcie 33800000.pcie: No bus range found for /soc@0/pcie@33800000, using [bus 00-ff] [ 0.784388] imx6q-pcie 33800000.pcie: IO 0x001ff80000..0x001ff8ffff -> 0x0000000000 [ 0.784403] imx6q-pcie 33800000.pcie: MEM 0x0018000000..0x001fefffff -> 0x0018000000 [ 0.937162] pps pps0: new PPS source ptp0 [ 0.943459] mdio_bus 30be0000.ethernet-1: MDIO device at address 3 is missing. [ 0.951382] fec 30be0000.ethernet eth0: registered PHC device 0 [ 0.952397] imx-dwmac 30bf0000.ethernet: IRQ eth_lpi not found [ 0.952494] imx-dwmac 30bf0000.ethernet: no reset control found [ 0.953284] imx-dwmac 30bf0000.ethernet: User ID: 0x10, Synopsys ID: 0x51 [ 0.953292] imx-dwmac 30bf0000.ethernet: DWMAC4/5 [ 0.953301] imx-dwmac 30bf0000.ethernet: DMA HW capability register supported [ 0.953305] imx-dwmac 30bf0000.ethernet: RX Checksum Offload Engine supported [ 0.953310] imx-dwmac 30bf0000.ethernet: TX Checksum insertion supported [ 0.953314] imx-dwmac 30bf0000.ethernet: Wake-Up On Lan supported [ 0.953318] imx-dwmac 30bf0000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 0.953325] imx-dwmac 30bf0000.ethernet: Enabled Flow TC (entries=8) [ 0.953334] imx-dwmac 30bf0000.ethernet: Enabling HW TC (entries=256, max_off=256) [ 0.953340] imx-dwmac 30bf0000.ethernet: Using 34 bits DMA width [ 1.139720] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.139739] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.140093] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000002021810010 [ 1.140143] xhci-hcd xhci-hcd.1.auto: irq 65, io mem 0x38100000 [ 1.140153] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.140164] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.140173] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.140684] hub 1-0:1.0: USB hub found [ 1.140706] hub 1-0:1.0: 1 port detected [ 1.140982] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.141372] hub 2-0:1.0: USB hub found [ 1.141407] hub 2-0:1.0: 1 port detected [ 1.142617] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.142645] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 3 [ 1.142987] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x0000002021810010 [ 1.143037] xhci-hcd xhci-hcd.2.auto: irq 66, io mem 0x38200000 [ 1.143047] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.143058] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 4 [ 1.143067] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 1.143528] hub 3-0:1.0: USB hub found [ 1.143553] hub 3-0:1.0: 1 port detected [ 1.143849] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.144276] hub 4-0:1.0: USB hub found [ 1.144295] hub 4-0:1.0: 1 port detected [ 1.146298] sdhci-esdhc-imx 30b50000.mmc: Got CD GPIO [ 1.146362] mmc1: CQHCI version 5.10 [ 1.148702] caam 30900000.crypto: device ID = 0x0a16040100000100 (Era 9) [ 1.148711] caam 30900000.crypto: job rings = 1, qi = 0 [ 1.163109] caam algorithms registered in /proc/crypto [ 1.164229] caam 30900000.crypto: caam pkc algorithms registered in /proc/crypto [ 1.164241] caam 30900000.crypto: registering rng-caam [ 1.165680] Device caam-keygen registered [ 1.170670] imx-drm display-subsystem: bound imx-lcdifv3-crtc.0 (ops 0xffff800010ecec48) [ 1.170725] imx-drm display-subsystem: bound imx-lcdifv3-crtc.1 (ops 0xffff800010ecec48) [ 1.170908] imx-drm display-subsystem: bound 32c00000.bus:ldb@32ec005c (ops 0xffff800010ebbc88) [ 1.171145] dwhdmi-imx 32fd8000.hdmi: Detected HDMI TX controller v2.13a with HDCP (samsung_dw_hdmi_phy2) [ 1.171477] dwhdmi-imx 32fd8000.hdmi: registered DesignWare HDMI I2C bus driver [ 1.172221] imx-drm display-subsystem: bound 32fd8000.hdmi (ops 0xffff800010ebc370) [ 1.172402] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 1.176660] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA [ 1.192437] Console: switching to colour frame buffer device 128x48 [ 1.201393] random: crng init done [ 1.212797] imx-drm display-subsystem: [drm] fb0: imx-drmdrmfb frame buffer device [ 1.215766] input: audio-hdmi HDMI Jack as /devices/platform/sound-hdmi/sound/card0/input0 [ 1.217167] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.217827] clk: Disabling unused clocks [ 1.219547] ALSA device list: [ 1.219552] #0: audio-hdmi [ 1.396277] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 1.592116] hub 3-1:1.0: USB hub found [ 1.592739] hub 3-1:1.0: 2 ports detected [ 1.768617] imx6q-pcie 33800000.pcie: Phy link never came up [ 1.771099] imx6q-pcie 33800000.pcie: failed to initialize host [ 1.777038] imx6q-pcie 33800000.pcie: unable to add pcie port. [ 1.790732] EXT4-fs (mmcblk2p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.790770] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 1.792767] devtmpfs: mounted [ 1.793219] Freeing unused kernel memory: 1984K [ 1.804319] Run /sbin/init as init process [ 1.804323] with arguments: [ 1.804326] /sbin/init [ 1.804329] nokaslr [ 1.804331] with environment: [ 1.804334] HOME=/ [ 1.804336] TERM=linux [ 2.559631] udevd[712]: starting version 3.2.14 [ 2.597956] udevd[712]: starting eudev-3.2.14 [ 2.651883] EXT4-fs (mmcblk2p1): re-mounted. Opts: (null) [ 2.657896] EXT4-fs (mmcblk2p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.723550] BTRFS: device label app devid 1 transid 165 /dev/mmcblk2p5 scanned by busybox (863) [ 2.724256] BTRFS info (device mmcblk2p5): using crc32c (crc32c-generic) checksum algorithm [ 2.724272] BTRFS info (device mmcblk2p5): flagging fs with big metadata feature [ 2.724283] BTRFS info (device mmcblk2p5): use zstd compression, level 3 [ 2.724292] BTRFS info (device mmcblk2p5): turning on async discard [ 2.724300] BTRFS info (device mmcblk2p5): using free space tree [ 2.724304] BTRFS info (device mmcblk2p5): has skinny extents [ 2.729525] BTRFS info (device mmcblk2p5): enabling ssd optimizations [ 3.599399] fec 30be0000.ethernet eth0: Unable to connect to phy [ 3.692714] imx-dwmac 30bf0000.ethernet eth1: PHY [stmmac-1:03] driver [Microchip KSZ9131 Gigabit PHY] (irq=POLL) [ 3.704027] imx-dwmac 30bf0000.ethernet eth1: No Safety Features support found [ 3.704053] imx-dwmac 30bf0000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported [ 3.704247] imx-dwmac 30bf0000.ethernet eth1: registered PTP clock [ 3.704559] imx-dwmac 30bf0000.ethernet eth1: configuring for phy/rgmii-id link mode [ 3.759379] zram0: detected capacity change from 0 to 1000001536 [ 3.796152] Adding 976560k swap on /dev/zram0. Priority:100 extents:1 across:976560k SS [ 6.786456] imx-dwmac 30bf0000.ethernet eth1: Link is Up - 1Gbps/Full - flow control rx/tx [ 6.786477] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 142.712021] fec 30be0000.ethernet eth0: Unable to connect to phy [ 142.747249] fec 30be0000.ethernet eth0: Unable to connect to phy [ 142.780924] fec 30be0000.ethernet eth0: Unable to connect to phy [ 142.814655] fec 30be0000.ethernet eth0: Unable to connect to phy