U-Boot 2020.04-at24 (Jun 25 2024 - 05:19:56 +0000) CPU: i.MX6ULL rev1.1 at 396 MHz Model: Atmark Techno Armadillo-IoT Gateway A6E Board DRAM: 512 MiB WDT: Started with servicing (10s timeout) PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: mxc_serial Out: mxc_serial Err: mxc_serial switch to partitions #0, OK mmc1 is current device flash target is MMC:1 Net: eth0: ethernet@2188000 Fastboot: Normal Normal Boot Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc1 is current device Cannot lookup file boot/boot.scr 6393280 bytes read in 1341 ms (4.5 MiB/s) Booting from mmc ... 40027 bytes read in 93 ms (419.9 KiB/s) Loading fdt boot/armadillo.dtb Cannot lookup file boot/overlays.txt ## Booting kernel from Legacy Image at 80800000 ... Image Name: Linux-5.10.232-0-at Created: 2024-12-20 2:05:01 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 6393216 Bytes = 6.1 MiB Load Address: 82000000 Entry Point: 82000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 83500000 Booting using the fdt blob at 0x83500000 Loading Kernel Image Loading Device Tree to 9ef1b000, end 9ef47fff ... OK Starting kernel ... [ 1.190794] rtc-rv8803 1-0032: hctosys: unable to read the hardware clock Starting image installer script Erasing eMMC data... ok Writing rootfs image... ok Writing boot loader... ok Preparing app partition... ok Finishing installation... board = 0003 product_id = 0003 ELS31 exists Installing SWU: /installer_swus/a6e-gw-container-installdisk.swu SWUpdate v2024.05.3_git20241031-r0 Licensed under GPLv2. See source distribution for detailed copyright notices. [INFO ] : SWUPDATE running : [print_registered_handlers] : no handler registered. [INFO ] : SWUPDATE running : [main] : Running on iot-a6e Revision at1 [INFO ] : SWUPDATE started : Software Update started ! [INFO ] : SWUPDATE running : [install_single_image] : Installing pre_script [INFO ] : SWUPDATE running : [install_single_image] : Installing swdesc_usb_container a6e-gw-container-image.tar [INFO ] : SWUPDATE running : [read_lines_notify] : Command 'command podman --root /target/var/lib/containers/storage_readonly --storage-opt additionalimagestore= load -i /installer_swus/a6e-gw-container-image.tar' output: [INFO ] : SWUPDATE running : [read_lines_notify] : Getting image source signatures [INFO ] : SWUPDATE running : [read_lines_notify] : Copying blob sha256:1d378002cfe96d583bf2e546e9d27fab6a40a5a8d7b6b0f6d94cc7af0ed1a7e6 [INFO ] : SWUPDATE running : [read_lines_notify] : Copying blob sha256:0cee9b6e126689480f812b337d8926e8b051e2c1e40b3e36701ea2554f367b9d [INFO ] : SWUPDATE running : [read_lines_notify] : Copying blob sha256:5da3dd3d27aff20725f07bc3f441adf2c7371fb841614942f22e6251d57c8ede [INFO ] : SWUPDATE running : [read_lines_notify] : Copying config sha256:0732b987f4c0847f405ed3cfbb873f4828ac7d8a6d2853cad7f3067f63dbe2d1 [INFO ] : SWUPDATE running : [read_lines_notify] : Writing manifest to image destination [INFO ] : SWUPDATE running : [read_lines_notify] : Loaded image: localhost/a6e-gw-container:v2.6.2 [INFO ] : SWUPDATE running : [install_single_image] : Installing swdesc_files --dest /var/app/rollback/volumes/gw_container resource_a6e/gw_container [INFO ] : SWUPDATE running : [install_single_image] : Installing swdesc_files --dest /etc/atmark/containers resource_a6e/a6e-gw-container.conf [INFO ] : SWUPDATE running : [install_single_image] : Installing swdesc_files --dest /etc/containers/aiot_gw_container_hooks.d resource_a6e/atmark-power-utils/aiot_gw_container_hooks.d [INFO ] : SWUPDATE running : [install_single_image] : Installing post_script [INFO ] : SWUPDATE running : [read_lines_notify] : No user certificate present: keeping one-time public certificate [INFO ] : SWUPDATE running : Installation in progress [INFO ] : SWUPDATE successful ! SWUPDATE successful ! Finished writing mmc. powering off now [ 211.808118] imx2-wdt 20bc000.watchdog: Device shutdown: Expect reboot! [ 211.815102] reboot: Power down