U-Boot 2020.04-at24 (Jun 25 2024 - 05:19:56 +0000)

CPU:   i.MX6ULL rev1.1 at 396 MHz
Model: Atmark Techno Armadillo-IoT Gateway A6E Board
DRAM:  512 MiB
WDT:   Started with servicing (10s timeout)
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC:   FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... OK
In:    mxc_serial
Out:   mxc_serial
Err:   mxc_serial
switch to partitions #0, OK
mmc0(part 0) is current device
flash target is MMC:0
Net:   eth0: ethernet@2188000
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot:  0  0
=>                                                 printenv mmcpart
mmcpart=1
=> printenv mmcdev
mmcdev=0
=> mmc dev 1
Card did not respond to voltage select!
=> 
=> mmc rescan || echo fail
=> run loadbootscript || echo ok
ok
=> run loadimage && echo ok
6393280 bytes read in 147 ms (41.5 MiB/s)
ok
=> ls mmc 1:1 /boot
Card did not respond to voltage select!
=> printenv loadimage
loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
=> printenv image
image=boot/uImage
=>