reboot: Restarting system Hermit-At v3.3.0 (armadillo-iotg-std) compiled at 10:41:18, Dec 08 2014 hermit> boot mmcsd: SD card at address 0x0000aaaa mmcsd: SU04G 3872256KiB gendisk: /dev/mmcblk0p1: start=0x00000030, size=0x00762510 gendisk: linux.bin.gz is found. (3545364 Bytes) Copying kernel..done. Uncompressing kernel...................................................................................................................................................................................................................................done. Doing console=ttymxc1,115200 Doing root=/dev/mmcblk0p1 Doing noinitrd Doing rootwait Booting Linux on physical CPU 0x0 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 3.14.36-at2 (atmark@atde5) (gcc version 4.6.3 (Debian 4.6.3-14atmark1) ) #1 PREEMPT Mon Jul 27 11:08:59 JST 2015 CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: Armadillo-410 Memory policy: Data cache writeback Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk0p1 noinitrd rootwait PID hash table entries: 512 (order: -1, 2048 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) allocated 262144 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Memory: 114800K/131072K available (5068K kernel code, 285K rwdata, 1660K rodata, 238K init, 295K bss, 16272K reserved) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .text : 0xc0008000 - 0xc069a4e8 (6730 kB) .init : 0xc069b000 - 0xc06d6b64 ( 239 kB) .data : 0xc06d8000 - 0xc071f60c ( 286 kB) .bss : 0xc071f60c - 0xc07692ec ( 296 kB) Preemptible hierarchical RCU implementation. NR_IRQS:16 nr_irqs:16 16 MXC IRQ initialized Switching to timer-based delay loop sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 64585974768ns Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 133.00 BogoMIPS (lpj=665000) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys blkio CPU: Testing write buffer coherency: ok Setting up static identity map for 0x804cc5d8 - 0x804cc630 devtmpfs: initialized pinctrl core: initialized pinctrl subsystem regulator-dummy: no parameters NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations imx25-pinctrl imx25-pinctrl.0: initialized IMX pinctrl driver bio: create slab at 0 adc081c Vref: at 3300 mV eSDHC1 Vcc: at 3300 mV eSDHC2 Vcc: at 3300 mV USB VBUS: at 5000 mV SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pca953x 3-0070: interrupt support not compiled in i2c-gpio i2c-gpio.3: using pins 17 (SDA) and 18 (SCL) i2c-gpio i2c-gpio.4: using pins 66 (SDA) and 65 (SCL) i2c i2c-0: IMX I2C adapter registered pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered Advanced Linux Sound Architecture Driver Initialized. Bluetooth: Core ver 2.18 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized Atmark Techno RS232C board detected at CON1(Rev 2, SerialNumber=2035). No add-on expansion board detected at CON2. Switched to clocksource mxc_timer1 NET: Registered protocol family 2 TCP established hash table entries: 1024 (order: 0, 4096 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP: reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 7260K (c1000000 - c1717000) futex hash table entries: 256 (order: -1, 3072 bytes) audit: initializing netlink subsys (disabled) audit: type=2000 audit(0.709:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 238 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) imx-sdma imx25-sdma: loaded firmware 1.0 imx-sdma imx25-sdma: initialized imx21-uart.1: ttymxc1 at MMIO 0x43f94000 (irq = 48, base_baud = 7500000) is a IMX console [ttymxc1] enabled imx21-uart.3: ttymxc3 at MMIO 0x50008000 (irq = 21, base_baud = 7500000) is a IMX brd: module loaded loop: module loaded physmap platform flash device: 02000000 at a0000000 physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x00891c Intel/Sharp Extended Query Table at 0x010A Intel/Sharp Extended Query Table at 0x010A Intel/Sharp Extended Query Table at 0x010A Intel/Sharp Extended Query Table at 0x010A Intel/Sharp Extended Query Table at 0x010A Using buffer write method Using auto-unlock on power-up/resume cfi_cmdset_0001: Erase suspend on write enabled Creating 4 MTD partitions on "physmap-flash": 0x000000000000-0x000000020000 : "nor.bootloader" 0x000000020000-0x000000420000 : "nor.kernel" 0x000000420000-0x000001f00000 : "nor.userland" 0x000001f00000-0x000002000000 : "nor.config" libphy: fec_enet_mii_bus: probed PPP generic driver version 2.4.2 usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver sierra_net usbcore: registered new interface driver cdc_ncm ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usb-storage usbcore: registered new interface driver usbserial usbcore: registered new interface driver sierra usbserial: USB Serial support registered for Sierra USB modem ci_hdrc ci_hdrc.0: EHCI Host Controller ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected ci_hdrc ci_hdrc.1: EHCI Host Controller ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected rtc-s35390a 3-0030: rtc core: registered rtc-s35390a as rtc0 i2c /dev entries driver lm75 3-0048: hwmon0: sensor 'lm75b' imx2-wdt imx2-wdt.0: timeout 60 sec (nowayout=0) usbcore: registered new interface driver btusb sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: no vqmmc regulator found mmc0: SDHCI controller on sdhci-esdhc-imx25.0 [sdhci-esdhc-imx25.0] using DMA mmc1: no vqmmc regulator found mmc1: SDHCI controller on sdhci-esdhc-imx25.1 [sdhci-esdhc-imx25.1] using DMA usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver snd-usb-audio usbcore: registered new interface driver snd-usb-caiaq oprofile: no performance counters oprofile: using timer interrupt. Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1907 buckets, 7628 max) ipip: IPv4 over IPv4 tunneling driver gre: GRE over IPv4 demultiplexor driver ip_gre: GRE over IPv4 tunneling driver mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new high speed SDHC card at address aaaa ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered Initializing XFRM netlink socket mmcblk0: mmc0:aaaa SU04G 3.69 GiB NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team sit: IPv6 over IPv4 tunneling driver mmcblk0: p1 NET: Registered protocol family 17 NET: Registered protocol family 15 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized registered taskstats version 1 eSDHC2 Vcc: incomplete constraints, leaving on regulator-dummy: incomplete constraints, leaving on input: gpio-keys as /devices/platform/gpio-keys/input/input0 input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input1 rtc-s35390a 3-0030: setting system clock to 2015-08-10 01:52:52 UTC (1439171572) ALSA device list: No soundcards found. kjournald starting. Commit interval 5 seconds EXT3-fs (mmcblk0p1): using internal journal EXT3-fs (mmcblk0p1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) on device 179:1. devtmpfs: mounted Freeing unused kernel memory: 236K (c069b000 - c06d6000) Mounting proc: done Starting fsck for root filesystem. fsck 1.25 (20-Sep-2001) fsck: fsck.ext3: not found fsck: Error 2 while executing fsck.ext3 for /dev/mmcblk0p1 Checking root filesystem: done Remounting root rw: EXT3-fs (mmcblk0p1): using internal journal done Mounting sysfs: done Mounting tmpfs on /dev: done Mounting tmpfs on /run: done Cleaning up system: done Running local start scripts. Starting the hotplug events dispatcher udevd: done Synthesizing the initial hotplug events: done usb 2-1: new full-speed USB device number 2 using ci_hdrc usb 2-1: not running at top speed; connect to a high speed hub usb 2-1: config 1 has an invalid interface number: 7 but max is 5 usb 2-1: config 1 has no interface number 5 sierra 2-1:1.0: Sierra USB modem converter detected usb 2-1: Sierra USB modem converter now attached to ttyUSB0 sierra 2-1:1.1: Sierra USB modem converter detected usb 2-1: Sierra USB modem converter now attached to ttyUSB1 sierra 2-1:1.2: Sierra USB modem converter detected usb 2-1: Sierra USB modem converter now attached to ttyUSB2 sierra 2-1:1.3: Sierra USB modem converter detected usb 2-1: Sierra USB modem converter now attached to ttyUSB3 sierra 2-1:1.4: Sierra USB modem converter detected usb 2-1: Sierra USB modem converter now attached to ttyUSB4 sierra_net 2-1:1.7 wwan0: register 'sierra_net' at usb-ci_hdrc.1-1, Sierra Wireless USB-to-WWAN Modem, 1a:ba:9e:38:01:07 Loading /etc/config: random: nonblocking pool is initialized done Changing file permissions: done Configure /home/ftp: done Mounting devpts: done Starting syslogd: done Starting klogd: done Loading kernel module: awl13_sdio awl13: Version 3.0.2 Load. Starting basic firewall: done Setting hostname: done Configuring network interfaces: fec imx25-fec.0 eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=imx25-fec-1:00, irq=-1) IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready udhcpc (v1.20.2) started Sending discover... Sending discover... Sending discover... No lease, failing failed Starting inetd: done Starting lighttpd: done Creating avahi.services: done Starting avahi.daemon: done Mounting ramfs /home/ftp/pub: done Running local start script (/etc/config/rc.local). select to AWLAN atmark-dist v1.42.0 (AtmarkTechno/Armadillo-IoTG-Std) Linux 3.14.36-at2 [armv5tejl arch] armadillo-iotg login: mmc1: queuing unknown CIS tuple 0x10 (5 bytes) mmc1: queuing unknown CIS tuple 0x10 (5 bytes) mmc1: new high speed SDIO card at address 3e67 awl13: RX Transmission mode SDINT HT mmc1: registerd "awl13" device as awlan0 awl13: wait wid response timed out awl13: failed WID_RESET awl13: l.291: awl13_firmware_load() failed on -5 awl13: MAC is 00:00:00:00:00:00