Armadilloフォーラム

お世話になります。
armadilloX1作業時に電源を再投入すると、OSが立ち上がらなく、下記メッセージがループします。
なにかが破損しているのでしょうか。また、復帰方法はありますか？

U-Boot SPL 2016.07-at25 (Mar 27 2024 - 10:49:03)
Trying to boot from SPI

U-Boot 2016.07-at25 (Mar 27 2024 - 10:49:03 +0900)

CPU: Freescale i.MX7D rev1.3 at 996MHz
CPU: Extended Commercial temperature grade (-20C to 105C) at 39C
Reset cause: POR
Watchdog enabled
I2C: ready
DRAM: 2 GiB
Boot Source: QSPI Flash
Board Type: Armadillo-X1(0a100000)
Revision: 0003
S/N: 15376
DRAM: 00001f05
XTAL: 00
X1 Addon EEPROM Detect
MMC: FSL_SDHC: 0
Loading Environment from SPI Flash... SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

Failed (-5)
Loading Environment from SPI Flash... SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
*** Warning - bad CRC, using default environment

Failed (-5)
In: serial
Out: serial
Err: serial
Found PFUZE300! deviceid 0x30, revid 0x11
Net: FEC0
switch to partitions #0, OK
mmc0(part 0) is current device
switch to partitions #0, OK
mmc0(part 0) is current device
reading boot.scr
** Unable to read file boot.scr **
reading boot.scr
** Unable to read file boot.scr **
reading uImage
12845336 bytes read in 305 ms (40.2 MiB/s)
Booting from mmc ...
reading armadillo_x1.dtb
51708 bytes read in 18 ms (2.7 MiB/s)
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-4.9.133-at35
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 12845272 Bytes = 12.3 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 84800000
Booting using the fdt blob at 0x84800000
Loading Kernel Image ... OK
Using Device Tree in place at 84800000, end 8480f9fb

Starting kernel ...

ご回答の程宜しくお願い致します。

==========
製品型番：armadilloX1
カーネルバージョン：Linux-4.9.133-at35
==========